All sorted out, both bulbs now H7, working just fine. Will hang on to the HID system, maybe use in the future.
Type: Posts; User: Ritzy
All sorted out, both bulbs now H7, working just fine. Will hang on to the HID system, maybe use in the future.
The stock plug is still there, you can see it in the picture, that is what is confusing. I plugged a bulb into the stock connector and it lit up, 2 bulbs don’t fit in there, though. Seems like a...
This is what I saw when I took low beam headlight out, doesn’t look like an H7. How the heck do I replace this?! Looks like this is a HID setup, but the factory plug is still intact?. I guess...
Sent pm
I was asking about about the exhaust actuator valve, if it needed to be removed at the airbox and the exhaust. I currently have an exhaust installed (no working valve) and I also wired the valve open...
But leaving it closed or open should not affect performance?
If you disconnect it from the pipe does it also need to be wired open at the airbox or just leave it be? I currently have exhaust that has no valve and also running a race ecm so it it not throwing...
When I purchased my all black 2009 XB12Scg it came with a complete set of white body work as well. I have wanted to swap it out just to see how it looks. It also came with a third white airbox cover...
Welcome! Buell’s are an acquired taste for most. I had a 01 X1 lightning years ago and now 09 XB12Scg. Enjoy the ride, there are a lot of members here with a great deal of knowledge!
That’s a nice looking pipe!
Here is a sound clip, pipe is just grabbed up, doesn’t sound at all like the other Termignoni videos I have watched. Need to figure out the rest of my mounting plan. Can’t wait to ride it and see...
No idea what it is actually going to sound like? The original Termignoni is not a very loud pipe. This one has been modified though, so we will see. I am hoping for an install by the end of the...
13564 This is the exhaust I picked up. Not sure how it’s going to work, but I am
Interested to see how it sounds....
Just seeing if there are any left out there anywhere?! Thanks in advance.
Lets try this....
https://youtu.be/iKvG0LspRYg
I know you cant see the actuator valve from this video, I would have to snap a picture while the lower is off the bike.
I did that, selected the video, it compresses the video then when I click upload it just spins and
doesnt upload the video, it just spins like it's trying to upload in the upper right corner next to...
I am having trouble uploading videos/images.
I have been trying to figure out which Buell pipe I actually have on my bike. The pipe has 2 outlets on the exhaust which would lead me to believe it is the race pipe. However it still has the...
Thanks, Cooter!
Trying to install steering stabilizer, the fork mount bracket for install is 56mm, says right on the bracket. It’s too large. From the research I have done, it shows that the outer diameter of the...
I did a video of buell Race exhaust and will do one once I have the Termignoni mounted. I didnt tear the exhaust off yet because it appears that I have the actuator valve still operational on the...
I just have the Buell tank bag, mounting system utilizes the front air box bolts and then bolts under the seat. It’s a bit bulky, but it doesn’t bother me when riding.
Mine is slightly different, it’s a shortened canister, professionally done. It also has the active valve removed and holes are plugged. I am going to try and get it installed this weekend, along...
I didn’t either, I just by chance came across it (it is a shortened version) wicked light, made of titanium.....not sure how durable it will be, I also scored an LSL steering stabilizer.
Anyone have a Termignoni on their XB. I came across one, shortened can. I have pulled the valve in the mid pipe and I am either going to have a new replica midpipe made or have the current midpipe...