They should be able to go in any order
Type: Posts; User: bobaganoosh
They should be able to go in any order
sold locally for 3300. goodbye buell people
$3500
https://www.youtube.com/watch?v=jqWy7cn-mkc&feature=youtube_gdata_player
Not sure if I did the imbeded part right, heres the link
Heres a video of it running I did for a guy
https://www.youtube.com/watch?v=jqWy7cn-mkc&feature=youtube_gdata_player
I forgot to ad that around 12,000 miles I had the rear cylinder base gasket leak. I pulled the motor and replaced all the top end gaskets. cylinders and pistons looked excellent
feel free to make...
This is my 2005 xb9sx although it doesn't really have any sx parts left on it. It has 15,000 miles on it and is in excellent condition. About 1000 miles ago I went through and completely tore it down...
Well it is running. turns out I had a couple of the cam sensor wired mixed up with the other sensor wires that is right above the pully by the starter. switched them around and it fired right up, 2...
just realized I have the temp sensor unplugged so that doesn't tell me anything. the battery is brand new but I have been cranking it quite a bit. still spins it over fine
just did the code test got
36 fan voltage
15 intake air temp sensor
16 battery voltage
not sure if that tells us anything
ok so the red wire going to the cam sensor has power with the key on. I used the black wire as the ground. I also pulled the cam sensor out and the rotor does spin when I crank it. is there a way to...
Just checked this, it does
alright now that makes sense. I was thinking the stator would have to be connected in order to generate spark
alright did the test and no flicker. looks like I need to do some more digging
I also just checked the 2 wires that are going from the voltage regulator to charge the battery. this should be dc power, I used my test light and when I crank it over neither wire lights up my test...
awesome thanks for the info.
just checked fuses and all are good
moved all the relays around and didn't make any difference
checked the plug going to the coil, the center grey wire does have...
I really don't see how something could fry just by the startor cranking it over. whats left to fry? the ecm? everything else works. fuel pump primes
put the new voltage regulator on. still no spark
Thanks for the help
I bought this off ebay thinking it would fit my 05 but apparently they are different. this has 4 wires coming out of it. I believe this fits 08 to 10 xb's. $60
call or text me at 315 783 8754...
I just looked at the manual again. the schematics show the 3 wires coming from the stator going into the regulator then the 2 wires coming out to the main harness. It doesn't show specific locations...
I got the correct regulator coming from someone on here so we will see if that fixes it
The manual I looked at had nothing for the regulator. all the wires are black
I have a voltage regulator I just bought off ebay that wont fit my 05 xb9. it came off a 08 xb12r. not sure if it will fit yours. the one I have has 4 wires coming out of it. id sell it for what I...
Plugs on the bike
http://www.buellxb.com/buell_images/6599_20140609180517_L.jpg
Plugs on the xb12r reg/rec
http://www.buellxb.com/buell_images/6599_20140609180428_L.jpg
Plugs on my old reg/rec...