I agree it goes on the disk sideand that is why nothing fit correctly but that's not my question. I want to know if the spacer is just supposed to be loose and sit on top of the bearing. I explained...
Type: Posts; User: bukwylde87
I agree it goes on the disk sideand that is why nothing fit correctly but that's not my question. I want to know if the spacer is just supposed to be loose and sit on top of the bearing. I explained...
Hey Lunatic. The dealership I bought from helped me figure out that I have had the spacer bushing on the wrong side. BUT the reason I did so was because 1) that's the way it showed up out of the box...
Thanks Lunatic. I'm pretty sure something is wrong with the bearing install. I'll go home and try everything one more time before I complain.
In 2010 Buell went to a 3 bearing set up across the xb product line. Prior to 2010 the would have 2 bearings and no dust covers.
I missed the part where you suggested doing this with the belt off, all my initial testing was done with the belt on. When I get home today I will attempt with the belt off. But one thing is still...
Item 1 is installed. My 2008 manual suggested a lower initial torque of 25 ft.lbs but I did a final torque of 50 ft.lbs and with the caliper off it was VERY difficult to spin the wheel.
I need help! I have an 08 ULY and decided to do the 3 bearing conversion. I bought the new wheel and the axle kit and had The dealer install the bearings and spacer before I picked it up. When I put...
After several days of searching I believe I have my answer but can someone just come out and say if the 07- present sportster rocker gaskets are the same as and will fit on the 07 and later XBs...
I'm a CT Bueller and would love to get together with some north east folks. I do day trips up to VT, NH, and RI pretty regularly.
Got one! Thanks seancrete.
I would like to find a race exhaust for my 08 XB12X. If you have a 2008 or later ecm I'd be interested in that as well. I would consider other aftermarket mufflers depending on price and condition....
Is this ecm still available?
What year was this bike?
Do you still have the exhaust actuator?
I couldn't tell if there was one in the picture but I'm looking for an exhaust valve actuator?
Thanks for the reply. That was very helpful. Now I just have to convince my wife!
This is a message for 50DRO. I know this is an older post but I am researching a new exhaust for my 2008 Ulysses and I found the review for the Torque Hammer on this site and followed it to 50DRO...