Search:

I'd say possibly a Spec-Ops modded exhaust.

Also, an xb9 in stock trim will only make 75 hp and maybe 60-63 ft/bs at the wheel, maybe.

I just dyno'd one back in November with an exhaust (mine) tuned to match and it made maybe 85 hp and...

wtf? If he's in first gear, why the **** not? WOT in 5th will suffer a little, but not in 1st. Whoolies man, whoolies. Or is that wheelies?

Intake seals. Use a high quality grease to install them properly and ensure that they don't leak.

Fuel pressure gauge?


https://st-paul-harley-davidson-buell.myshopify.com/products/b45522-a-genuine-buell-fuel-pressure-gauge-adapter-2003-2010-xb-1125-models-l19d?_pos=1&_sid=32614b728&_ss=r

I'm at a loss here. The header with the blown out O2 sensor *CAN* be repaired. What's the link have to do with either replacing or repairing the header have to do with it?

Are you just wanting to...

https://st-paul-harley-davidson-buell.myshopify.com/products/s0101-7aa-genuine-buell-header-all-2004-2010-xb12r-xb12s-xb12x-models-u7b

You can have the original welded, just make sure it's cleaned...

Lol.

The stock header *IS* stainless steel.

No comment on the rest of the parts you want to buy from them.

"the primary oil/fluid lubricates your transmission...primary drive components...and assorted ancillary bearings and bushings. it does NOT lubricate the clutch assembly. it only lowers its...

Check for an intake leak. I'd suspect the seals are not in good shape.

If it turns out that they're actually leaking, replace them. While you're at it, clean the throttle body well and reset the...

Chin fairing.
https://www.facebook.com/groups/126669661276941/permalink/672909916652910/?sale_post_id=672909916652910

The group referenced.
https://www.facebook.com/groups/126669661276941/

Send the ecm to IDSPD.com (Tim at IDS) and have them put it back to it's factory state. Absolutely THE best way to know it was done right.

Dumb question here. Why not spend another $300 and install an Innovate DLG-1 wideband setup on it and KNOW how it's really running?

https://www.youtube.com/watch?v=JncXcAl8J3M

New Castle has them I think.

Yes to the red loctite. Remove the subframe spacers, you should have one set of bolts extra, put those back in. Basically, remove the spacer bolts, remove the spacers, drop the tail section back...

It did not. :( Fixtures were made, some work was done but the guy doing the machining work failed me quite spectacularly. Still using the same machine shop, just different guys getting my stuff done...

The first 11 sold quickly enough that I'll be doing 11 more due to demand for a total of 22 skid plates. Yes, it's an investment on my part, but you guys are worth it. If you want one, I WILL have...

http://www.surdyke.com/PartsMain.aspx?PartNumber=33900-99&SubCatID=&CatID=&Name=&CatName=NEUTRAL%20INDICATOR%20SWITCH,%20XL

OEM part # is 33900-99, it may be superceeded by now.

https://www.facebook.com/permalink.php?story_fbid=3416436145034226&id=245433732134499

Running a presale, 4th of July, 2020. Code is "7-4-2020" and will get you a 10% discount a couple of things....

Ok, these are in process as of earlier this week. I am going to go out on a limb here and say they'll probably be done and ready to ship by just after the 4th of July. Go Merica!
The machine shop...

Last call for this. I have 5 firm commits, I'll do a couple of extras just to make sure the machine shop has the required amount of work to make it worthwhile. I will not be doing these again for a...

From the FB post, I should have done this earlier, but with the crap I have going on, I miss things occasionally. Cut off date to order one will be the 15th of this month. I will have at least one or...

I am taking a break from building for the time being, personal/medical issue. I've had quite a few requests over the last 2 weeks for builds, I cannot do so at this time. Long story heavily edited...

This is probably the best option. I've had several over the last 10 years and have one on my Uly right now. Assuming you can find one, snatch it up.
...

I can call him, he lives about 20 minutes away from me. He's on FB. I'd offer other help, but I've stopped building stuff for now and taking orders. Semi-long story behind why, not going into details...