An adapter to adapt the stock VR mount to a MOSFET Shindengen/Rick's Motorsport R/R
I am using the LiFePO4 made by Rick's for Revival, found here:...
Type: Posts; User: Nooner
An adapter to adapt the stock VR mount to a MOSFET Shindengen/Rick's Motorsport R/R
I am using the LiFePO4 made by Rick's for Revival, found here:...
https://www.facebook.com/groups/46213864076/
If you will be in the Austin area for MotoGP feel free to drop in on the Hillcountry Hellbuellies Facebook Page - I'll be hosting a little get together pretty near downtown.
Lemme know if you are riding - I'm hosting a little Buell get-together Saturday night.
https://docs.google.com/open?id=0Bzra099-IBnvYV9hX3E0akJhMm8
good luck!!!
Remember use at your own risk - I will not be responsible for anything that may happen if your do not get the brackets...
Guys, after talking with my wife we've decided that having 20 sets of these brackets cut(so that the unit pricing pays for both production and shipping) when only 10 are sold is not a wise decision....
hey guys - sorry for the delay in updates. I plan on getting the ball rolling with the machinist on Monday, so hopefully I'll have the brackets in hand by the end of the month.
Hey, thanks for...
I plan on getting them cut as sets. I don't plan on breaking up the sets unless both sides of the set are pre-sold. I am paying a machinist to make these brackets, so there is no margin, so I am NOT...
6061 T6
The price as it stands is $75 Shipped, for both brackets, no color (you can paint with the color of your choice or clear), These will be ready to bolt up your Brembo Master and Caliper. I...
bump - any additional interest? We are almost there!!!
I am pretty confident with anything Ducati or Aprilia.
Let me check my stock plunger with the Brembo Master - I see to recall the stock plunger was larger than the Brembo...
Also, just to...
Agreed - I now run the Brembo RCS19 with the ZTL2 8-pot caliper on the front too (I upgraded from the ZTL 6-pot caliper). It wasn't a low budget affair, but it is pretty nice - I did have to give up...
No, but honestly, why not? It is about $40 for a new master cylinder and less for a used one (you can also usually buy them as a set on ebay). With a matched set you do get much better feel, and with...
bump to see if there is more interest - there need to be at least 10 folks interested to make this possible. Please feel free to spread the word to other forums if'n you feel up to it.
I could possibly sell a batch of caliper brackets only for $65 shipped. I'd have to sell the master brackets only for $15 shipped.
PS - If anyone is a machinist and wants to take over production I am happy to send you the 3D .dwg files in exchange for a set of brackets! ;)
Maybe you can produce them for less and pass on the...
The one place I checked wants $250 per batch - that works out to $12.50 per set, I just didn't feel it was worth the cost, I'd have to ask $90 shipped (to cover the gas to get to the anodize place...
Here is his cost for the bracket:
http://www.ebay.com/itm/special-customizing-rear-Brake-Caliper-Holder-Bracket-Buell-XB9-XB12/170835930429?ssPageName=WDVW&rd=1&ih=007&category=35569&cmd=ViewItem
...
http://www.buellxb.com/buell_images/6233_20120511121230_L.jpg
http://www.buellxb.com/buell_images/6233_20120511121313_L.jpg
Here are the updated pictures of the CAD file. There has been a bit...
Okay - sorry for the delay in getting these done, but we've made two sets of prototypes (both plastic) and are pretty comfortable with them now.
Just got my quote from the machinist, using 6061 T6...
Okay, just got the prototypes off the machine and have test fit them on the bike/rearsets...
They fit great!!!
We are tweaking the cutouts to make them a little more 'organic' - basically get...
I don't think they get any better than CRG's
They have a new model that looks pretty nice, but all my experience is with their Roll-a-Click model, I wouldn't hesitate to recommend them to anyone.
I think you can get away with about $80 on the tools. That is the Traxxion spring compressor and Seal Driver.
You can make a tool to do the fork level pretty easy, just use a baby medicine...
I don't have experience with it on a Uly, but it worked great on my Lightning. I have the Traxxion seal driver too, worked like a charm.
Yup - you can get the tools you need from Traxxion Dynamics. The big ones that I wouldn't want to do it without are:
-Spring Compressor
-Seal Driver
then you need a hex extension if you don't...