Thanks so much! Just purchased those. Very reasonable for a full engine set.
Type: Posts; User: getweir'd
Thanks so much! Just purchased those. Very reasonable for a full engine set.
dibs on the rear foot pegs and brackets!
Thank you for the heads up on the intake seals. Will review the service manual and heed your advice when assembling. The exhaust photo is before it was fully complete. A front bracket was added to...
Yes, marked them when they were pulled out. Have been using the service manual as a guide. The bent ones are only bent by 0.01" (measured with a dial indicator) but you can easily see they are...
I really appreciate you checking your spares for pushrods! Yes, 2008 XB12. I don't need anything adjustable, just stock settings. Will post more updates as the rebuild progresses (mostly to make...
Don't have a spring compressor, so made one from a piece of 1" square tube and a clamp:...
Then, poor HD engineering kicked in. Took a bit of work to diagnose the problem. Bike died while mid-ride. Was lucky enough to have a couple friendly neighbors give me a lift home (i wasn't...
https://lh3.googleusercontent.com/pw/AL9nZEXajmqpmGNEGGrq3V_pDBzjBd3kfa9zrNzdY6QIADtpA1xQBUGnvohaiK1LYsQyjOOxojzUUmou7uF4eJWhg1afTuH0VWXQwtLPyqHkZPW54O5fI6ouTt0o_yrPbUEuQ9a6j_ESXvhi5kK66YW2vre-=w1353-...
Update. Exhaust turned out great. Vent lines also good. Made an intake and catch can that fit under the airbox cover.
...
I'm interested. DM if you still have them. Thanks!
Fuel line converted to -4AN:...
those who know, know. previous/ongoing project:
http://www.speedhunters.com/2016/10/crx-rwd-turbo-a-honda-surprise/
New header is coming along....
Header started:
16195
16196
16197
16198
16199
Modified covers:
16194
16191
16192
16193
No idea why the photos load upside down? Anyway:
16186
16187
Discovered that it was leaking oil, so apart it came:
16188
16189
gasket is completely flat
16190
Hey all,
Intro: My name is Aaron. I work at Vibrant Performance and love all things grass roots DIY, especially fabrication. This is going to be a thread for my 2008 XB12scg and all the...
thank you for sharing this. i will be removing the pcv valves and replacing them with hose ends that will fasten directly to the valve covers so they will no longer be part of the the system. they...
Wondering if this hydro conversion was completed? Any details?
link to hydro kit?
is anyone using a check valve to prevent back flow instead of a filter? this is what I plan to do with my setup that will be getting rid of the grommets/fittings in the valve covers.
i vote for matte as well.
I will be building my own. Can't wait to hear how it sounds.
Thank you for sharing this info. I find this stuff very interesting. Love my Buell, hope to make some parts for it soon- I'll have to make a fixture ;)
Reviving an old thread here. I'm in Waterdown.