Search:

You’re doing it wrong

and CoOter finally shamed me into pulling the trigger on my Antigravity battery and frame/engine sliders. Am I the only one around here still planning on tracking a Buell?

The only purchases I...

I just heard this one the other day "booger sugar"

No, that’s not the reason

You can take apart a XB fuel cap with a small pick, then you can remove the cylinder and knock out the wafers/tumblers and covert your keyed cap to keyless (but you need a screwdriver or something...

Use a piece of thin wwall brass tubing to reinforce the interior of the turn signal stalk. I think I got mine at Ace. Also, I think Twin sells a “reinforcement” that fits in the grooves of the...

Shut it CoOter!
17489

What do you really know about riding fast anyhow?

17490

I was kidding about your being CoOter (and trolling us).


I don’t know why I didn’t run your files through megalogviewer. As soon as you mentioned it, I thought “Duh! What is wrong with me!”...

1, get your battery load tested. 12.7v doesn’t mean your battery is good.

2. Bypass your factory grounds. Use a jumper cable or similar

I put an aftermarket steering stop on my R3 track bike. She needs a lot of room to turn when you can’t lean, like making a turning around in the paddock. CoOter rode my bike once at a trackday and...

I think I was able to get a good bleed on mine without removing the caliper. I use fairly large syringe and carefully wrap some Teflon tape on the bleeder threads. I also remove the rear reservoir...

Are you referring to the "lock" that locks the steering in place when the key is set to LOCK and removed?
or are you referring to the limited amount you can turn the forks from left to right?

The...

What are you putting these logs into? I tried putting them into TunerPro 4 and it isn't recognizing them.

Let's break down what you have going on here:



Yes, Buells usually have a very rich...

No, I don’t. That’s kooky talk.

Ever since “someone” got me into track riding that is.

I'm 2008 also.

I'll put these down on the list of things to buy to finish my track bike.

1. Battery
2. Sliders
3. Tank grips

I think Sandro just posted on here that he is only doing ASV levers any more.


And BTW... I already have Race Face on my mountain bike.

17484

So, I haven't posted much lately on this, but here is the completed Methbuell. Doesn't look half bad any more.

I pulled the Forcewinder off it.

17480

17481

17482

Your bike is 08-up right?

I'll have to look them up and buy a set. I'll tell them you sent me and ask for a discount.

Let me know if you want those plugs.

First off, what do you mean by "splash guards"? Are you referring to the front fender? (fits all XB's) and the rear hugger?

Never seen that guy before, but if you're looking for what I think you...

17474


Where did ya get the sliders? Since CoOter has been CoOter-splaining a lot of track riding education to me, and its starting to stick, I may need them. I still haven't mastered the whole...

I bought the Amazon version of the replacement LED headlight assembly. If you're after the stock look with a more modern light solution, its a pretty good option. The light output and quality is a...

I would start by pulling the primary and inspecting the shift pawl assembly.

Supposedly the Buell shocks are rebuild able (from what I understand). You may want to double check with an outfit such as Race Tech.

https://racetech.com/



I think my shock only has about...

Let me translate this for you.....

Win for Boat Ski!!!!