Search:

Type: Posts; User: tokinbuller

Page 1 of 5 1 2 3 4

Search: Search took 0.11 seconds.

  1. well, for what its worth, the map(s) i got from...

    well, for what its worth, the map(s) i got from this gentleman at Buelltooth were all corrupted, and at first, i felt like the bike was running good. after loading them onto ECMspy to see the...
  2. Replies
    7
    Views
    1,574

    Flash your map to your bike from ECMdroid, and...

    Flash your map to your bike from ECMdroid, and then just hook it up to ECMspy and "fetch EEPROM". This will load your EEPROM/map you acquired from Droid, into ECMspy format.
    I see your issue,...
  3. You did a TPS reset after the flash right, prior...

    You did a TPS reset after the flash right, prior to start up?
    Reason i think its a possibly corrupted map is i loaded one like that once, that had many zeros in the fuel map, when it got corrupted...
  4. possibly a corrupted map. I would re-download,...

    possibly a corrupted map. I would re-download, and re-flash. Bike run fine?
  5. Replies
    7
    Views
    1,574

    If this isnt your issue, ill chime in a little...

    If this isnt your issue, ill chime in a little later when i get home and am in front of my pc with all my stuff on it. Also, you have ECM spy right? If so, load your EEPROM, then go to maps...
  6. Replies
    7
    Views
    1,574

    ah ok i see your issue, and i had the same issue...

    ah ok i see your issue, and i had the same issue too. I ended up having to use ECMspy to load my maps created from MLV, and then would save them on the droid app, just for ease of use. But...
  7. Replies
    7
    Views
    1,574

    on the logging screen in the driod app, are you...

    on the logging screen in the driod app, are you clicking the box "convert to MSL" ? if you are, you should have no issues loading the MSL file (not bin file) onto MLV.
  8. Replies
    11
    Views
    4,227

    Flash your stock map back to the bike, reset AFV,...

    Flash your stock map back to the bike, reset AFV, and TPS and ride for at least 30 miles. And re-check your AFV values. As stated above, did you know your values prior to adding these mods? Its...
  9. Replies
    26
    Views
    3,150

    took some wiggling, but they fit on my 07. cant...

    took some wiggling, but they fit on my 07. cant comment though on 08-10. Has the intake flange changed from 04-10?
  10. Replies
    14
    Views
    1,823

    I personally would go with the Droid/ECMspy...

    I personally would go with the Droid/ECMspy route. its $40, and does the exact same thing as a $300 race ECM.
  11. Replies
    7
    Views
    1,175

    Negative on the SS

    Negative on the SS
  12. Replies
    12
    Views
    1,790

    do you have a Throttle body?

    do you have a Throttle body?
  13. Replies
    8
    Views
    2,779

    slightly related. Its been about a month + with...

    slightly related. Its been about a month + with no issues, but when i replaced mine on my injectors, i didnt pay close enough attention when pulling the clamps off the injectors, and didnt realize...
  14. Replies
    5
    Views
    971

    T-Rex for me

    T-Rex for me
  15. Replies
    12
    Views
    1,218

    When I did the breather reroute it helped a bit...

    When I did the breather reroute it helped a bit getting off the line gently, and made it feel like it could be babied rather than having to apply a good throttle. Also, call me crazy, but when I...
  16. Thread: Misfire

    by tokinbuller
    Replies
    18
    Views
    1,602

    Hey Cooter, your info is spot on. Personally this...

    Hey Cooter, your info is spot on. Personally this is must have item for any Bueller imo. Everyone is bound to have a cel, or want to check/reset AFV or to just be more in the know of how your bike...
  17. Thread: Misfire

    by tokinbuller
    Replies
    18
    Views
    1,602

    You have a 2009, you don’t need that stuff to...

    You have a 2009, you don’t need that stuff to reset your tps sensor. Just for diagnostics of CEL codes.
    The 08+ Buells are equipped with Idle Air Control logic, and the idle air and speed is under...
  18. Thread: Misfire

    by tokinbuller
    Replies
    18
    Views
    1,602

    You can download your service manual at...

    You can download your service manual at buellmods.com. There are ground locations on each side of the battery under the seat. You battery terminals and under the base plate under your intake filter....
  19. Thread: Misfire

    by tokinbuller
    Replies
    18
    Views
    1,602

    Sounds like the same problem. RPM Couple of...

    Sounds like the same problem. RPM Couple of hundred low? On idle or?
    Does your “miss” feel like a hesitation or a stutter? And when this occurs is this when you CEL comes on?
    Lunatic gave sound...
  20. ECMdroid uses xpr. format, and ECMspy uses txt....

    ECMdroid uses xpr. format, and ECMspy uses txt. format. Buellmods maps are in txt. format. so in order to use buellmods map you must use ECMspy.
    Tokin
  21. try this for reference. This is a Uly, but it...

    try this for reference. This is a Uly, but it should be extremely similar, just possibly in a slightly different spot on the rack.
    ...
  22. Replies
    21
    Views
    2,481

    Ok gotcha. I have the connect issue with Spy...

    Ok gotcha. I have the connect issue with Spy sometimes too. Are you using autodetect to connect to com port or selecting it manually? I can only seem to ever get mine to connect using auto. ...
  23. Replies
    3
    Views
    840

    More details on your bike. Year mileage mods. How...

    More details on your bike. Year mileage mods. How long has this issue been present? Just start recently? Did you buy it with this issue? Recently done any maintenance?
  24. Replies
    21
    Views
    2,481

    I believe you need the program, ECMspy, or mono....

    I believe you need the program, ECMspy, or mono. What year is your bike ?

    A buelltooth dongle will connect to ECMspy through blue tooth without needing the cable.
  25. Found this info helpful when I had grounding...

    Found this info helpful when I had grounding issue, from a post by ReadyXB, the shake test worked for me:
    "Do you have a service manual? There is a complete wiring diagram and also some diagnostic...
Results 1 to 25 of 116
Page 1 of 5 1 2 3 4