Here is one I can't find, torque spec for primary sprocket to magneto for an 03 XB9.
It is pressed in place, so I just did them to 20ft-lbs, it did seem a little tight like the threads were going...
Type: Posts; User: jfkersh
Here is one I can't find, torque spec for primary sprocket to magneto for an 03 XB9.
It is pressed in place, so I just did them to 20ft-lbs, it did seem a little tight like the threads were going...
Add another earth wire from the battery to the mount for the coil. I had been chasing a miss at 3000rpm for years, this solution fixed it.
Cheers
John
I know this is an old post, but where do you get one of these alloy primary?
Cheers John
I would suggest to do a TPS reset, that will stop the low idle.
After looking at the vid, it appears to respond well.
If you pull back on the rubber boots you will see an allen head screw,this may have to be loosened, but I just push my mirrors to where I want them. In fact I have similar ones to yours they will...
I have been looking for months for a front cylinder head for my XB. It looks like the 9 and 12 share the same, and I think they must be in big demand to put onto other makes. I bought a rear one...
Yah ride it, if it is your first bike, get to know what you can do with it.
Can do things like racing sparkies-Champion make em, white wire mod, air stack removal, comp leeds 8.5mm, right side air...