Search:

Ya when I replaced my reg and pump, I replaced all the lines in the assembly as well so I know its not those. Those lines failing is what initially led to all my problems. Im going to try to source a...

[QUOTE=lunaticfringe;602528]^^^^^^what James mentioned above. other than dedicated coil wire which, by the way, is not intended to nor does it address the problem you're describing.....you've...

Hey Guys,

I got an 06 XB9...Have been trying to iron out the issue I have with this bike stalling out at 4k. If I jump on the gas it will start sputtering and cut out completely at around 4-4.5 k...

I havent checked pressure before the reg yet....that will take a bit more monkeying around, but I'm sure i should go about doing that at some point. I didn't buy a 'kit' per se, but I installed the...

The needle on the pressure tester won't even move, won't register any pressure because all the fuel is being diverted to the return line by the regulator

So I'm making another appeal for help....I've just been through a third fuel pressure regulator and fuel filter on the off chance that the new one i had previously bought was a lemon.

I'm still...

Ok so I've taken the fuel pump out and have bucket tested it. I had to do a bunch of running around to get the pieces required to assemble a reliable pressure tester. I'm going to post pictures of...

I've done this before....it blew one of the relays...easy fix....can get them at local parts store....ford ac relay

followed the mustang fuel pump guide

Posted a previous thread about my bike not getting fuel...pulled my injectors yesterday to confirm that they were actually squirting. They are in fact squirting but the amount seems pretty minimal. I...

This process seems way to easy for me to be messing it up, that I'm beginning to be convinced its something else. Lunatic, I followed your process to a 'T'. Still nothing. If I turn the to TPD up to...

I'm at a loss....I don't know what I could be doing wrong.

I must have gone through this same procedure 25 times today.

Followed this......

Heres what I've done: Backed the idle screw out(counter clockwise) until it no longer comes in contact with the stopper. Im confirming this by snapping the throttle and listening for the stopper...

Is there a function on ecmdroid to show throttle voltage? I have no idea where I'm supposed to have the idle screw at

Alright fellas, I'm back!
Got my bluetooth dongle in the mail today, was just fooling around with it. Hoping some of you are familiar with Ecmdroid.
Went to the active tests tab, and tested out all...

I have a fuel injector cleaner...Schraeder valve sealed to a tube from a can of carb cleaner...Connect injector to schraeder valve...pressurize with a bit of carb cleaner and energize the...

No i haven't...I don't have any of that hardware...Im guessing i have to order that online?

Ya, I squirted some fuel down the TB and it fires right up

Alright guys, still stumped....heres what I've done...

Took out the fuel pump assembly...number of things going wrong in here that I corrected. The strainer to the pump had completely...

how do I do that? and if its weak?

how do i go about doing that? and if its weak?

Hey guys...got a caper for you here...

2006 Buell XB9

Highway riding the other day and my fuel light goes on...I make it maybe 2 kms before the bike completely dies and I have to pull off the...

As the title suggests....All parts from previous owner, so not sure of their origin. The guards have some rash on them. Not sure if the mirrors are stock. They have a small 'J' emblem on them that...

Alternatively, I'll straight up buy one if I can't find someone to do a swap

Hey guys, not sure if too many people are into the cheese grater. I'm looking to get rid of it...was hoping I'd be lucky enough to find someone who would wanna trade their tail tidy for my grater....