Haha. I will have to tell you the story of that rug.
Type: Posts; User: 34nineteen
Haha. I will have to tell you the story of that rug.
I use a solid steel round bar supported by a jack stand on either side. It’s pretty stable and you can adjust the height with the jackstands.
I also use a curated selection of the finest 2x4’s,...
When you disconnect the fuel line from the rail as Barrett described, it will “purge” itself.
I would highly recommend taking the extra steps to pull the frame off the engine to make...
Ha! Its just my reality. RedBuell (tm) is almost back together. woot woot!
Hopefully my S1 cases will be on their way back from Hammer to me.
Meth bike is just meth bike (but with new pretty...
https://media.giphy.com/media/5wWf7GR2nhgamhRnEuA/giphy.gif
984's are for pansies and communists. Go 1170 or go home.
Why dont you shut the hell up.
The plane: A B-25 Mitchell aka "Barrett"
The bombs : 1 wisdom, 1 knowledge, 1 experience (also 1 for good looks, but its out of frame in this photo)
14871
This is correct. At minimum, it requires a rotation. I prefer to do a complete removal. I feel the added steps taken to remove the frame from the motor, make the process of working on the motor much...
What this guy said ^^^^^
If the motor is seized, you're going to need to knock about $2000 off your asking price. I am working on an XB I picked up for less than $1000 that had a bad motor, and I...
On his video, it shows the motor "blowing bubbles" at the base gasket.
And that job is a PITA, as the motor needs to be rotated which will take about 1/2 a day for the first time, or better yet separate the frame from the motor. Then the throttle body assembly needs to...
You may want to find someone who actually WANTS to work on a BUELL. Shops that build Harleys typically aren't your best bet as they want to work on HARLEYS. Not some 15 year old weirdo wanna be...