does it make a nice strong "normal" fuel priming sound when you first start it?
Have you checked the plugs?
Type: Posts; User: Carsten
does it make a nice strong "normal" fuel priming sound when you first start it?
Have you checked the plugs?
it's actually a pair of flood lights set up to look stock. sadly no beam pattern so aren't legal/fit for use on NZ roads.
had two real issues. bad fuel pump and stuck closed injectors
and a...
Almost done, needs the headlight changed for a stock unit so I can register it to for road use here in NZ.
but I took her for a short 40km ride on a private roads today,
yeah but getting it to NZ would cost way to much and to expensive for me with the NZD being rubbish vs USD
thanks, a size would help alot! I've given up looking for a stock exhaust, ordered a magnaflow 11148 via ebay,
are you willing to sell the rear 2 muffler straps on there own? and send them cheaply to New Zealand?
didn't realize the PCV system was missing until recently,
first post, link to a project you can see the exhaust is missing, and the airbox/filter I have, didn't want to piece it altogether to take...
Success, she started after an soaking the injectors overnight in kero,
then spraying carb cleaner thru them while pulsing them with 12v till they gave an acceptable pattern,
shes a little rough...
Buelltooth arrived, havent had time to do anything with the bike over xmas/new years, so havent checked the fuel pressure
but have found a few moments to play with the buell tooth,
there are no...
sent you a PM
maybe, will wait for the buelltooth and fuel pressure test before I remove them
I didn't, but the importer will have to test it before sale
Ok, will look into that as a possibility
couldn't tell you how long it was sitting, jap import non runner , there was fuel in it about 4-5 Liters.
Thanks everyone for the help so far,
would this work? just connect the 8mm hose barb to a fuel pressure gauge?
I did the replacement pump and metal filter,
while I wait for the buell tooth I'll get the fuel pressure checked,
what are these fittings called and what size are they? I'll pick up a...
work finished early,
the earths either side of the battery have been inspected and cleaned, didn't really need it
have also added a couple of new earth cables as per...
yes. I bought a buelltooth yesterday .. so will be a couple weeks to get it.
also is this yellow wire meant to be plugged into something?
OK,
error codes, 33 fuel pump and 44 BAS, old codes or current?
6.6volts measured on the BAS terminals
the clutch switch seams to function as it should with very little resistance only a few ohms...
thanks.
it's a 2004 xb9s
I'm located in the North. Auckland to be precise.
OK I will try those things asap. thank you
cool, I'll head to the wreckers this weekend and get a plug.
I don't know why or how long the bike had been sitting prior to me buying it.
if I need to remove the injectors for cleaning, is this...
Ok, so bought a project, non runner from japan, 13000km https://www.buellxb.com/forum/showthread.php?55002-Project-2004-XB9S
the first thought was pump. no priming noise,
so the pump and filter...
mint gonna find that part!
great, will do that thanks
yep, have a pump here already. just waiting on the filter to show up, and i need to find the 3 o-rings that go on the fuel pump outlet if anyone can help?
#18 in this pic