Search:

Type: Posts; User: d_adams

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds.

  1. Replies
    5
    Views
    221

    It's pretty easy to block someone there and not...

    It's pretty easy to block someone there and not listen to the BS if you don't want to.
    Often it's better to stay quiet, although as a mod I have a hard time doing so.
    Just watch out for that Jacob...
  2. Replies
    10
    Views
    210

    I know this was posted several years ago, direct...

    I know this was posted several years ago, direct from hmf. Something along the line of about a 4 hp gain over stock. As I recall, they were the OEM for building the stock exhaust as well.
    ...
  3. Replies
    6
    Views
    236

    Lots of differences between the motors. Pre-07...

    Lots of differences between the motors. Pre-07 used a CPS (cam position sensor) and the 08+ uses a crank position sensor. Cranks between them are completely different.
  4. Replies
    6
    Views
    236

    No, engines are different from 07 to 08+.

    No, engines are different from 07 to 08+.
  5. Replies
    4
    Views
    119

    Paypal processing was broken, apparently on my...

    Paypal processing was broken, apparently on my end after an internal upgrade. Looks like I've missed out on about 15 attempted orders in the last 2 weeks.
  6. Yes, it will fit. Thicker than the originals, but...

    Yes, it will fit. Thicker than the originals, but I believe those are the current replacement parts.
  7. Replies
    6
    Views
    546

    The New Castle part linked above is probably your...

    The New Castle part linked above is probably your cheapest option for an OEM part. It will work on any year (or displacement) XB. Mine were $500 a set when I was making them.
  8. Replies
    9
    Views
    576

    While it's possible his account was hacked, I...

    While it's possible his account was hacked, I don't believe it to be. The website and information appear to be correct. I've been to it (previously, before this was posted) and while I haven't...
  9. Replies
    52
    Views
    2,314

    Far from a stupid guess, it's just some people...

    Far from a stupid guess, it's just some people have far more knowledge than others. Asking questions and taking stuff apart is how you learn. I learned quite a bit more than I knew previously after a...
  10. Replies
    52
    Views
    2,314

    Plain and simple answer, theft of IP. No physical...

    Plain and simple answer, theft of IP. No physical way possible for two different tuners to come up with identical maps for completely different exhaust systems.

    I've never looked at the...
  11. Replies
    5
    Views
    315

    I haven't done one in probably 2 years, but I...

    I haven't done one in probably 2 years, but I could possibly be talked into it again.
  12. Replies
    5
    Views
    315

    Have one built. 12129

    Have one built.

    12129
  13. Replies
    52
    Views
    2,314

    Keep in mind that the stock setup was heavily...

    Keep in mind that the stock setup was heavily restricted by the EPA. European models are even more restricted than the US versions due to the noise and smog/pollution laws over there.
  14. Replies
    18
    Views
    808

    Put one of these on it and see how it's really...

    Put one of these on it and see how it's really running. I'm betting you'll be shocked at how far off it really is. https://www.innovatemotorsports.com/products/dlg1.php
  15. Replies
    52
    Views
    2,314

    No, they do not.

    No, they do not.
  16. Sticky: July4th2019 Use that for a discount code on...

    July4th2019

    Use that for a discount code on exhaust systems.

    http://deanadamsdesigns.com/
  17. Replies
    52
    Views
    2,314

    DDFI-3 can log the data via pins 1 and 33 on the...

    DDFI-3 can log the data via pins 1 and 33 on the gray connector. You'll have to add the wires to the harness by taking the connector apart and adding them in by hand. It's a bit of a pain to do, I've...
  18. Replies
    4
    Views
    297

    While it's not exactly a common failure, it does...

    While it's not exactly a common failure, it does happen. Clean it up, purge it with argon and weld it with 309 filler. The small dent will not affect the flow of the exhaust gas.
  19. Thread: Dae

    by d_adams
    Replies
    9
    Views
    609

    This is the factory torque spec. Also, the...

    This is the factory torque spec.

    Also, the spacer included depends on how it's mounted. Some require it, others don't. It's dependant on the header mounting and how it's lined up. Most of the time...
  20. Replies
    23
    Views
    1,322

    The cam position sensor is one of the very few...

    The cam position sensor is one of the very few things that can (do) fail with no error codes showing. It *IS* and 03, so it's the cheaper CPS to just replace it and be done. I've had this happen to...
  21. I believe the injectors can be pulled/serviced...

    I believe the injectors can be pulled/serviced without removing the throttle body. Kind of a pita, but it can be done. They're held in with clips that slide off the side, they're Ford injectors or...
  22. Replies
    82
    Views
    13,350

    Sticky: Going to post a few links of tools or parts here....

    Going to post a few links of tools or parts here. If it's not in stock currently, it's being made and will be available within a week or so at most. I'd like to see some of this stuff move out soon,...
  23. Thread: Lean mixture

    by d_adams
    Replies
    4
    Views
    296

    Change your intake seals (lean condition) and new...

    Change your intake seals (lean condition) and new plugs. Verify correct calibration for the ecm/exhaust combination.
  24. Replies
    82
    Views
    13,350

    Sticky: Just placed an order with my machinist, I should...

    Just placed an order with my machinist, I should have these back in stock within the next couple of weeks. Link is live, so if you want a set, go ahead and order it.

    ...
  25. Replies
    0
    Views
    131

    Buell 1125 & EBR 1190 crank locking tool

    Having another batch of these done. Last ones were powder coated in a neon yellow/green to make it hard to lose them. Not sure what color I'll have them done in this time, probably won't be pink...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4