Search:

How much and where are you located, any pics

new link:

http://newjersey.craigslist.org/mcy/5363731879.html

motorcycle is still available for sale

http://newjersey.craigslist.org/mcy/5286385270.html

check your mail box, PM

I have '05 Lightning that needs trans work. I'm the second owner and had it for 5-6 years and about 100 miles. Recently I started riding it and after 20 miles of highway riding trans wouldn't go...

sold

you are not supposed to re-use nut also manual calls for Permatex 27200 tread-locker
don't forget: lazy work twice

You also might want to remove that Duralast TPS and install one from HD, I shop at AutoZone all the time and throughout the years I learned the hard way that Duralast electric parts have numerous...

well in that case, why not try HD dealer :)
if it makes you feel better I drive Australian Holden Monaro and Ausie parts are pretty expensive in the USA
please excuse my ignorance

I would use a brass or aluminum punch and smaller hammer. Tap the head of the bolt few times followed by the application of penetrating oil, let it sit few minutes then 3-4 more hits, then try...

I don't understand why is this a big deal. HD dealer will give you correct, up to date belt specific to your VIN.
keep it simple, just go to your dealer

1. remove valve stems
2. add Li-Ion battery ( extreme handling improvements + better 1/4 mi times )

all jokes aside I would not remove belt cover, around 12k miles I got stone puncture with...

lamarchangel is right, do you blip the throttle a lot - 1125 does not like spikes in throttle and tends to shut off when you do this, at least until you take out AIS and adapt yourself to Rotax's...

for best results use
50% Mobil-1 Twin 20w50
45% Castrol Syntec 15w40
5% Penzoil 5w30 for added viscosity

that's just my fact based opinion

Red 2009 1125cr with 5869 miles. There are no problems with the bike and as far as the upgrades/repairs I had following done:
- replaced instrument cluster under warranty and re-flashed ECM (unsure...

Every bike is going to have relays for lights including Uly, however you do not need to know where it is.
You need an extra relay (relay in the schematic above) and a piece of wire t-tapped from the...

rotation is not required, however it is a super slow process to take those flange bolts out, it helps if you have half-moon wrenches (there was a write up here on the forum)

You meet the nicest people on a Honda

You can finance this motorcycle through Harley-Davidson dealer same as you would any other H-D bike, HD Bank is offering owner-to-owner financing for all current customers (me), and as a current...

here's my 2 cents, price reduction, $6,499.98
btw mileage is around 5900

- rewind stator with 260*C wire (Rick's does a nice job and have quick turnaround)
- install EBR rotor with oiling provision
- replace regulator rectifier with MOSFET type

make sure you perform...

1k views, close but no cigar. Still for sale in NJ

1. what do you mean by "when I switch the wires on the VR to by pass it"
2. with engine off: check continuity of each of the (3) windings of the rotor at the plug under the seat I beleive its 3...

PM sent, check your mailbox

Mileage is going up
http://www.buellxb.com/buell_images/9646_20130620163125_L.jpg