Will the 08 1125r ecm work in my 05 XB1200m
Type: Posts; User: 0311devil
Will the 08 1125r ecm work in my 05 XB1200m
I have 5volts at TPS, and i got no spark. What you thinkin now?
want to test mine for diag purposes. anyone? cant find it in the service manual
yeah. And I dont think its the ecm because I still have power to the injector plugs..just no pulsation
Only codes I have are injectors. But my pump amd fuel pressure are good. Injectors ohmd out perfect too.
To test if its shorted out
I dont understand. Already tested 5 volts at the plug. But how to I test the actual sensor
How do I test it? I cant find anything in the service manual. What are the testing procedures?
No injector pulse with the noid lights when I go to start it. Ideas?
Borrowed some noid lights to check injector pulse tonight. Could it be fuel pressure regulator causing the injector codes? Guess ill be checking that too
Wasnt a permanent bypass. Just bypassed it to see if the neutral switch was shorted. And it was. So I need to dig deeper. Idk man. Been lookin at schematics and the service manual all night. Im lost
Neutral safety switch is smoked. I can bypass it and the bike finally shows its in neutral. Still no start. Still throwing injector codes
Just ohmd the injectors. They tested fine. I got 12 v going to the injector harnesses. 12v going to the coil as well. Still no start. The bikes in neutral, but the neutral light isnt on. Gotta pull...
Ok will check that after work. But I pulled code 23 and 32. Thats it
Ok I pulled codes for both injectors. Nothing else. Does the ecm have its own code, or can a bad ecm throw those codes?
Kelly, no problem man. Just pissed. Havemt ridden in two years. About to pull some codes and see what it says...keep ya posted
No new gas. Bought 2 new relays. It turns over now, bit no starting. I had it running fine before I screwed up w. The battery
Ok replaced another relay. Bike turns over now, but does not start. Wtf
My neutral light isnt coming on either
Check and cleaned up the start button...still blowing the ignition fuse
Not to mention its not like I fully connected the battery the wrong way. I touched the wire on the battery for a second and pulled it away. So I thought it was only a fuse or relay? Can a relay be...
My bike didnt even turn over when I made this mistake. I put the new diode in, and keep blowing the ignition fuse. Its seems like pressing the start button is causing an a short in the ignition...
I ohmed out the diode and show nothing at all testing it either way. Stuff I found online says its bad of it tests like that. Will be goin to Harley tomorrow to get one and see what happens
Kelly, what ended up being the problem? With a new fuse...everything seems fine. Lights, gauges and fuel pump all energize. Thats what makes me think its NOT the ecm. But the second I hit the start...
Is there a way to test the ecm? I replaced the one relay, and my lights and fuel pump kick on. But the fuse blows when I hit the start button.