Search:

Its does not snow that much here. wth would I want that weed eater motor? lol

Okay, So I had a buellXB12R...but I moved to Japan.

Now I do not have a bike.

I have ridden many bikes, but I need a bike that is just like a Buell...but not a buell.
Basically I need a bike...

PROBLEM RESOLVED

After some careful analysis, I noticed the idle adjustment screw had been laying on one of the fins, this caused it to become metal to metal. This also cause an abrasion to the...

Just did this and it took me les than an hour. Easy job. Just have to have the gut to go for it.

Mods are Breather mod only.

I JUST put new pluigs in yesterday.

The static timing is good, what other timing should I check? the CPS? I did drop it about a month ago, never noticed a difference...

So I have check for manifold leaks and I have not found any. Can anyone tell me why my bike is doing this?
Bike is a 2006 XB12R
https://youtu.be/zjmSpXc3sGw
nullhttps://youtu.be/zjmSpXc3sGw

check the port?

nothing changed.
I use USB, have been using USB for the past year.

So I ECM spy used to work great with my bike and laptop. All of a sudden today, ECMspy is not connecting to the bike at all.
I have uninstalled and re installed ECMspy

Anyone have any ideas on...

I was just curious, what is the difference between these exhausts?

I have heard a lot about the RT-1, must repack every 5k miles, but what about the GP-1?
Are they both basically the same or...

so what happened?
was it ever fixed?

The first time I had no spark issues, the spark plug wires were not plug in the coil pack correctly...
" omg my butt hurts for a ****ty issue, but I am not gonna admit it."

You could quite...

okay so after the getting the battler tested it is lower than normal. at about 12.3v sitting.
When I start it up it, idle goes up to a range of 13.3 and reaches 14.4 when the throttle is yanked...

Shawns,
Yeah, I wired it properly.

I am thinking it is prob the battery. Once the light comes on, and the sputter happens, the bike runs fine.

The ballast are fine. I used each alone, and they both did the same thing.

So here we go...
I have installed 35w HID lights into my 2006 Firebolt. I ran wires for the power from the battery using a relay. I have a delay switch that allows the bike to start without the...

I live in MURFREESBORO!
Lets Ride!
:D:D:D:D:D:D:D:D:D:D:D:D

Anyone from Middle Tennessee area?

old thread, but I love hoe this guys asks for advice and you just give your own opinions. Did he ever get any details on painting?

old thread, but I love hoe this guys asks for advice and you just give your own opinions. Did he ever get any details on painting?

damn how are you going to "bike" tease me like that?

Personal computer not connecter to NPPRNET? lol

So i hooked up to ECMspy but was able to datalog. It just rained really bad.


http://i.imgur.com/XbgMbmQ.png
This was the fuel value at ECM page
------------------------------------------...

I modified the bike in FEB this year. Started acting up in may.

When I bought the bike the open airbox was already installed.
After I took it home I changed the air filter, and did breather...

So I might have fixed it a little.
-I pulled apart the box, found my TPS sensor to be loose.
-Little rubber oring on the TPS was missing, made a gasket and replaced.
-Checked the spark plugs...

open airbox
beathermod
EBR ECM(came with the bike.)