I will have some Blast and 07 XB12r parts as well as other stuff.
Type: Posts; User: Heyzeus
I will have some Blast and 07 XB12r parts as well as other stuff.
On Sat Moto Forza in Escondido is going to have a parts swap meet. I will have a table set up with Buell parts and Italian parts to sell. There will be burgers as well. Come join the fun.
thank you
I loved my XB but I found a sexy Italian girl I wanted more. I will have another one day. MV Agusta Brutale 800 in red. I tried to post a pic but it no worky.
...
XB wheel bearings
XB r smoke windshield
XB12r 07 STOCK ECM
Blast stock exhaust
Blast wheels
Blast seat
Make offers Plus shipping
I used the ECM spy to do a TPS reset and it worked just fine. I was having problems getting my maps to run right. When in closed loop they would lean right out. I was probably too rich. I did not...
Can you still use ecm spy to do a tps reset for the ebr ecm? Sounds like a dumb question but I hope I can.
I had a Blast and I miss it. I only had some minor mods but it was fun. I had oversize tires, the front forks were shimmed and the oil was changed to 5wt. I had a Vance hines exhaust, rejeted the...
Do you have ecm spy? Look at you AFV fuel number. What is it? Try to reset AFV and TPS. This will give you a clean slate to troubleshoot. It may even fix the issue. What does it do when it struggles?
When you are inspecting for trannys make sure reach down and feel for giggle berries. If there there its a tranny or just look for the adam's apple. Opps wrong tranny. Sorry I could not help myself.
Did you reset your afv?
Also did you change to oil pump gear. This is a weak spot on these bikes. You can order a new and improved one that differs in material from the one you have in the 04. You should have when the bike...
There is a naked SV650 at ECC in escondido with 10,000 miles on it. Ask for Mike the sales manager. Anyone like these?
Start simple first. Do you have ECM SPY? Check the codes. If not you can do the jumper trick and count the red light. Surging and shutting off may be the Cam position sensor or something else. What...
I replaced with hose due to my vinyl plasticy thingy having a hole in it so my fuel pump could not build pressure. I recommend replacing to hose. I believe it is 3/8" line.
It is not to hard to pull the fuel pump. Autozone has a pump that will work. Order O-rings and screen from ASB. Autozone or the others will have the pump. The part number is Airtex E2061. I just...
You need to start with the basics and work up from there. Set TPS and reset AFV first then look for the next gremlin.
So my new map goes to 70 afv after closed loop. I guess I am running to rich...
I want a stock exhaust.
My info is from the owner of the company that did the liquidation. He was also involved in other motorcycle brands liquidation. He may be full of poop but he seemed genuine. He said Buell was the...
Talked to a guy involved in the Buell liquidation. He said that HD destroyed 25 truck loads of spare parts for Buells. People were offering them money and they refused. They wanted to be the sole...
Pulled the fuel pump and found a bad hose. I changed the fuel filter fram g3606 and put a new airteck e2061 fuel pump. Still it suffered. I did all the diagnostics all the way to the ecm. No luck all...
I disconnect the new engine temp sensor and she idles. I plug her in and she dies?
So I got it to idle but it is still wonky. I replaced the head temp sensor. It would not idle and then tons of smoke and a fast idle for thirty seconds and I turned her off. I think the smoke is from...
So I finally got a code for the cam position sensor. I changed it out and same problem. Idles rough for a short time and dies. I disconnected the head temp sensor and waala she idles. Abit rough but...
The RC51 is a nice bike. When I bought my 07 Bolt there was a RC51 next to her. I choose the Bolt as I love Buell's.
I could have had a good deal on either. Both nice bikes but the Buell is where my...