Search:

It’s under data channels. You can have 4 running on the screen at once. You may need to change one to it to view that data.

Haha. I will have to tell you the story of that rug.

Have you checked fuel pressure? It’s not uncommon for the fuel pumps to start flaking out at this point. The gauge is relatively cheap from Buelltooth.

Or maybe your injectors are plugged and...

I use a solid steel round bar supported by a jack stand on either side. It’s pretty stable and you can adjust the height with the jackstands.

I also use a curated selection of the finest 2x4’s,...

Maybe it’s a bad tps. It is a mechanical sensor and the bike is only 15+ years old. It wouldn’t hurt to investigate. I’ve heard stories of the throttle shafts breaking so it’s worth a look.

I’ll have to check my big book of wiring diagrams and trouble codes.

I agree. People like to push back when we say to check and clean your grounds, but there is a reason why. A little effort can go a long way.

I’m glad to hear you found your gremlin!

When you disconnect the fuel line from the rail as Barrett described, it will “purge” itself.

I would highly recommend taking the extra steps to pull the frame off the engine to make...

I found your YouTube channel and saw you added an LED taillight with turn signals? What model did you use and how did you like it?

Do you have a pic of the wiring? May help to figure out what is going on.

Damn! Touché my friend, nicely played


https://youtu.be/05fX9mSrv3M

I may have an isolator with a questionable bushing at home. I will have to look this weekend in my piles of parts. (shut it Cooter!)

Oh yeah, youre that guy. :cool:

I am running a new Bosch O2 also. If I have any issues or weirdness, I'll report back.

On its mine's maiden voyage, I realized I had leaky fuel pump o rings....

Yeah, it looks like he's into box shaped vehicles. WTF!

https://jruiter.com/wp-content/uploads/2019/11/Consumer-Car-Banner_01-uai-2064x1210.jpg
...

Electronics can break down, and maybe you did have a coil getting weak. Did you test the values across the terminals to see if it measured within spec? This is helpful info to have, as I've been...

“My name is Cooter and I have a motorcycle problem”

“Hi Cooter!”

Maybe we should call this "Cooter as Ice"

https://i.ytimg.com/vi/nq4GIJM4lAM/movieposter.jpg

(be glad I dont have time to Photoshop this) :black_eyed:

Heh heh. Cooter sends stuff to my house addressed to "Aarons Buell Junk Yard" or "No Beer Discount Buell Parts"

I think I enjoy turning wrenches on them more than riding them. It seems like as...

Link courtesy of buellxb.com about 2 posts above yours.

Is that a joke aimed at me? :mad-new::black_eyed:

Good read. Thanks for posting that. It’s interesting to hear Erik’s story on what really happened vs the “internet truth”.

They were a little taller. Thats why I was looking for a 2006 when I bought mine.

I know the Streetfighter bar will fit, but the cables will be at their length limits.

Shut up COOT-AIR! :love_heart: :black_eyed: Are you coming back to Phoenix soon?

Wait, so you wanted the "advice of accomplished fishermen" and when the sea captain handed you exactly what you needed... you had to confirm it?

I gave you the knowledge of how to find the...

You have to lift it more than slightly. You could do it on a paddock, maybe if you set in on a couple of 2x4's... but a better choice may be a steel rod through the rear axle with a set of jack...