Looking to buy a 1125 passenger seat! Hit me up if you have one!
Chris
Type: Posts; User: Cjdesign
Looking to buy a 1125 passenger seat! Hit me up if you have one!
Chris
Need a 1125 CR front headlight assembly with fairing. Leemeknow!
OK! I still need the following:
- The Tail Lock for the rear fender to unlock the seat. If it's cost effective i'll buy a ignition with it to make the same key work for both.
Let me know!
Hey Guys just picked up another 1125 CR. I need a few parts for it:
- The Tail Lock for the rear fender to unlock the seat. If it's cost effective i'll buy a ignition with it to make the same key...
:) Found one.
Hey guys! I'm wondering if anyone has access to or could create a 3d model of the 1125. I'd be using it to 3d print a few parts for fun.
Fixed! Was the VR. Now to find a better location so this one doesn’t fry too..
THANK you to all who have been patient with me.
Yup it was toast.
So I have a new non shunt style mosfet- but am not sure which yellow wire goes where..
Here is the VR I have:
...
Stator passed with flying colors 3000k rpm was around 45-50v on all 3 poles.
Now what!
OK: It passed the ground test and the resistance test resulted in .8 olhms on all 3 - with a multi-meter probe-to-probe test of .2 olhms
It's too late to be revving my bike - neighbor across the...
Ok so I know there is a TON of info on here about the stator swap power suck issue. What I can't seem to find is a step by step from diagnosis to complete repair.
I have a VR from Cooter (Thanks...
Cool Sarge, I'll PM you.
Hey guys,
Looking for a stock factory exhaust for the 1125R or CR.
I have a modded Stock exhaust, but it's too loud for me, even though it's not loud lol.
I also have a modded FMF Carbon...
I ended up grabbing a used full stand off ebay for $65. the parts and shipping for ordering just new parts was iup to $35 so I figured why not. Plus the turn around time was 10 days.
Seriously the BEST response someone could have received. Thank you for the help :D
GregoXB: Why even respond if you're not going to help out. heh.
RavonRayne: I'd download google translate, the app. You can turn on camera mode and hover your phone over the words and it will...
Hey guys, I magically lost my kickstand spring AND spring arm. The stand is still there, and the clip is still on the bolt which boggles the mind.
I know Harley isn't going to touch it, even...
Hey guys, I received a FMF Apex carbon exhaust with my bike when I bought it, but it's CRAZY loud. I'm installing a few baffles but the last person to pack the pipe used gray gasket silicone between...
Post 14. x2.
;) lol.
So much work! But sounds great :)
Huge thanks again, to Cooter and his help on my CR issues this spring. Just wanted to update him and the forum that the bike still rocks. I only loose voltage when it's crazy hot, and or cruising too...
You got it. Wrapping up the bits needed to make it complete :)
BOOOOOM! She's alive! 2nd coil was bad... After all that. Somehow over the winter the low voltage in some way ruined both coils when trying to start the bike...
SO I swapped it out with a new...
UPDATES:
I pulled the throttle body off
Cleaned out the IAC
Bought a new O2 sensor
tested the 02 sensor wire for power (was at 4.7v)
Bike idles perfectly now! BUT: still low power. It's...