Search:

Thanks everyone for the suggestions. After 3 weeks of research, testing, trial and error, it turns there were two issues. Chicknstripn was correct, the bike was overheating. I didn't know how to...

i bought the parts from Hammer performance. I was under the impression that i had to update the 08 stator with the new crankshaft. I ddn't know it was inferior to the 05. i did install the 08...

The cooling fan was working right before all of this happened. The last few rides have been so short, that it didn't need to come on. However, I am not ruling out overheating as of yet.

I...

I disconnected the stator from the regulator, and checked the resistance on the leads (there are only two on the '08 version). Resistance is .6, which i believe is normal range. Stator doesn't...

Bike is a 2005 XB12Scg with 34k miles. Was rebuilt less than a year ago with a 2008 flywheel and connecting rods, and a 2008 stator. Had to splice the stator wire harness because the pins on the...

UMDterp13, I'm in Glen Burnie. I have $1,200 in parts that should be here in a day or two from Hammer Performance. I am upgrading to the newer flywheel and rods with the 1.5" crankpin, so it's too...

I hit a bit of a snag. I was measuring the outer race for a new pinion bearing and found that it was beyond the wear limit. I am measuring 1.5750, and manual says that anything beyond 1.5672 needs...

Dellinger, I am in the process of rebuilding my XB12SCG due to a worn front connecting rod, and I've been talking to Dan at Hammer Performance a bit to see what upgrades make sense. Hammer has a...

Trying to post some images:
http://www.buellxb.com/buell_images/19554_20141018201947_L.jpg

http://www.buellxb.com/buell_images/19554_20141018202103_L.jpg
...

Thanks to everyone for this awesome forum. Been reading here for almost three years, and it has been extremely helpful. Now I finally have something to post. I ride a 2005 XB12SCG Lightning. Love...