The bright spot Is mainly due to the camera. In real life the output looks better. This comparison was made by a customer. If you close the pictures, you can read his findings
Type: Posts; User: marcel
The bright spot Is mainly due to the camera. In real life the output looks better. This comparison was made by a customer. If you close the pictures, you can read his findings
Yes, if you click on the link you will see the difference!
https://www.facebook.com/photo.php?fbid=2284398761844631&set=pcb.10157031851854853&type=3&theater
All of the 4,65 inch lights will fit in the original housing, but it takes a lot of sawing, filing and sanding.... I did it a couple of times, but now I make new housings using a 3D printer. Now its...
Hahaha you've read my mind! For the next one I will make, I also want to see how it looks with Halo's. I'll keep you posted.
It works!
56645665
I will update you all when I'm done with them. BTW, I'm also working on a FULL LED version with automatic light switch.
Doesn't need an extra wire from the battery and doesn't need ballasts!...
I will let you know!
Hahahhaha I will have 3 more later this month which I will convert, so if you're interested, let me know 👍. The output is amazing! Because both headlights come on at the same time, and it's xenon,...
Thanks @tomaatti! I also really like it! and just so you know.... I have 1 for sale
@flatout, the Headlight is done! I really the new setup. It looks more OEM and I've added a switch to my handlebars, so I now have: Angel eyes only, Angel eyes and Low beam, Angel eyes and High beam....
@flatout, the projectors came in and here is an update! Just waiting for the angel eyes. I decided to get the normal angel eyes instead of the dual colored once. This, because the normal once are...
Thanks
Well, the second headlight unit is in, and I expect the new projectors to be in any day now. I've looked at the Morimoto's but in my opinion, there is not enough room. They are 13 mm longer,...
Just a small recap after 1 day.
Would I do it the same if I could do it all over.
In short, no.
I’m very happy with the results, but I would make some changes.
1) The shades for the angel...
Hahaha that's my special horn! :D but thanks! I'm very happy with the results!
Speaking about horns, I had to relocate mine in order to get some room behind the flyscreen. I removed the horn and...
Succes!!!!!!!! everything works as it should! I made a small video, to show what it does!
1) Turn on ignition (headlight switch is on high beam) -> The angel eyes are lit
2) Turn signal left...
So I found an hour to spend on the bike, so first I tried to get the wire from the battery to the flyscreen. To get this done, I removed the airbox and the air filter. Then I removed the plate under...
So this is the end result for now. Everything is fits nicely and the projectors don't touch the lens of the housing.
Hopefully I have some time on Monday to install them on the bike!
4164
Yesterday I did a small update on the project. I've made the wiring harnas from the headlight to the bike. (picture will follow). I did this with a 6 way waterproof connector and already made some...
That's cheap Cooter. I've seen some youtube video's about the tool and it looks awesome!! Unfortunately Harbor Freight does not send it overseas to the Netherlands. I will see if this tool is also...
Thanks Cooter!!! This will help me on my way and it is exactly the height I was aiming for. Although I like the look of using the bottom hole for the top hole of the windscreen, the totally exposed...
I did look at the Morimoto mini's but those are not "mini" enough :) they are 4cm taller than the projectors I've used. My idea now is to start with the 35 watt's and see how it goes. If I feel that...
It's not on the bike jet, but I think it will be next weekend :) I will than make a couple of beam shots. I tested the wiring harnas and it works like a charm. I'm a bit in doubt about which Xenon...
So I found a solution. Make the hole a bite wider. And this worked like a charm.
4100
I used an extra ring to secure the projector.
4101
And finale I make the connection for the high beam...
So I tried again, and it looks good!
With a bit of force I can close the housing. But because of the heat of the Xenon, I'm not confident that the plastic lens of the housing will handle this....
They look nice, but I couldn't close the housing, because the lens would touch the lens of the housing. So the first step was to make some room. Starting with the metal clip that's in the reflector....