Search:

On my XB with the roached motor, one of the corregated fuel hoses had 2 small hoses in it. The reduction in fuel pressure contributed to the lean issues, compounded by the other issues the bike had...

This is a great adventure. I think having it right up front on the forum makes it easier for all to enjoy. Thanks for taking the time to take pics and the great writeup!

Thanks also for that info. That post was super helpful and I learned a few things.

1. I didnt know you could have more than 4 data streams in ECMDroid.
2. I didnt know about the max setting for...

http://cdn.shopify.com/s/files/1/0535/6917/products/mistakesdemotivator_grande.jpeg?v=1554328460

Aircooled engines are designed to run over a much wider range of temperatures than watercooled. While it could be that the pipe did get hot, its not definitive that is was over heated. It could just...

Until then, here is the instructions from the service book. Just replace Digital Technician with ECMDroid or ECMSpy. There are also several places on the web such as rev-mo that did a web page...

The 6 to the coast is open spaces, tall trees, smooth turns, green grass, horses, and a lot of weed dispensaries. Just before the southern turn on the 101 is the newly remodeled Tillamook Creamery! I...

Wednesday, February 24, 2021
Episode 9: Home. The other one.
We have killed for beauty. I mean the royal “we”… unless my sweet Bubbles has a terrible secret? But the seriousness of the...

Monday, February 15, 2021
Episode 8: Kites and Tears
Perspective is a powerful and ultimately positive tool. It has the power to open dialogue, open minds, center oneself, and even relieve...

One of the guys on the forum even made a video on how to do this, and posted it in several spots on here.

Let me see if I can find a LMGTFY link for it.

It’s under data channels. You can have 4 running on the screen at once. You may need to change one to it to view that data.

Haha. I will have to tell you the story of that rug.

Have you checked fuel pressure? It’s not uncommon for the fuel pumps to start flaking out at this point. The gauge is relatively cheap from Buelltooth.

Or maybe your injectors are plugged and...

I use a solid steel round bar supported by a jack stand on either side. It’s pretty stable and you can adjust the height with the jackstands.

I also use a curated selection of the finest 2x4’s,...

Maybe it’s a bad tps. It is a mechanical sensor and the bike is only 15+ years old. It wouldn’t hurt to investigate. I’ve heard stories of the throttle shafts breaking so it’s worth a look.

I’ll have to check my big book of wiring diagrams and trouble codes.

I agree. People like to push back when we say to check and clean your grounds, but there is a reason why. A little effort can go a long way.

I’m glad to hear you found your gremlin!

When you disconnect the fuel line from the rail as Barrett described, it will “purge” itself.

I would highly recommend taking the extra steps to pull the frame off the engine to make...

I found your YouTube channel and saw you added an LED taillight with turn signals? What model did you use and how did you like it?

Do you have a pic of the wiring? May help to figure out what is going on.

Damn! Touché my friend, nicely played


https://youtu.be/05fX9mSrv3M

I may have an isolator with a questionable bushing at home. I will have to look this weekend in my piles of parts. (shut it Cooter!)

Oh yeah, youre that guy. :cool:

I am running a new Bosch O2 also. If I have any issues or weirdness, I'll report back.

On its mine's maiden voyage, I realized I had leaky fuel pump o rings....

Yeah, it looks like he's into box shaped vehicles. WTF!

https://jruiter.com/wp-content/uploads/2019/11/Consumer-Car-Banner_01-uai-2064x1210.jpg
...

Electronics can break down, and maybe you did have a coil getting weak. Did you test the values across the terminals to see if it measured within spec? This is helpful info to have, as I've been...