Search:

Type: Posts; User: ocgreenmachine

Page 1 of 17 1 2 3 4

Search: Search took 0.35 seconds.

  1. Replies
    18
    Views
    665

    2009 XB 1250 as my daily commuter. Was commuting...

    2009 XB 1250 as my daily commuter. Was commuting 60 miles a day, now 40 miles a day. It has been a great commuting bike.
  2. Replies
    6
    Views
    509

    APH Performance sells headers. Dean Adams may...

    APH Performance sells headers. Dean Adams may also.
  3. I've been toying with upgrading to a faster bike,...

    I've been toying with upgrading to a faster bike, so depends on where and how much cash... I am in California. I have a 09' XB12. Here is a list of everything on it:

    ~ Personally signed by Erik...
  4. Replies
    10
    Views
    797

    How did you adjust the clutch at the primary? ...

    How did you adjust the clutch at the primary? Should be counterclockwise until light bottom and then about 1/2 turn clockwise (With my Muller Power Clutch it is more like 1/4 to 3/8 turn). The...
  5. I had believed it was a fuel pump or regulator...

    I had believed it was a fuel pump or regulator issue since the pump was abnormally loud and had pulled the pump out to replace/check those components. With Jacob Stark's help (from MotoEnthusiasts),...
  6. I had the same issue with my 09' XB when i...

    I had the same issue with my 09' XB when i purchased it a couple years ago. Turned out the plastic hose that goes from the fuel pump to the fuel regulator had two pinholes in it due to age. That...
  7. I should have had some pudding with those spoons...

    I should have had some pudding with those spoons afterwards just for fun :D
  8. DIY Voltage Gauge on instrument cluster

    Here is a revised video to one I posted a while ago using a better wiring method by Jake Ogden from the BuellXB facebook page. enjoy!


    https://www.youtube.com/watch?v=9DO2L_gMJas&feature=youtu.be
  9. Thread: Dae

    by ocgreenmachine
    Replies
    9
    Views
    576

    Looks right, but make sure you don't overtighten...

    Looks right, but make sure you don't overtighten the T-Clamp. I had breakages due to my mistake of overtightening the clamp. I believe he recommends 110-120 in/lbs on those t-clamps.
  10. I think I have a map for my 2009 xb12 Drummer SS...

    I think I have a map for my 2009 xb12 Drummer SS map laying around somewhere. What is your ECM version?
  11. Replies
    50
    Views
    1,633

    how does your fuel pump sound?

    how does your fuel pump sound?
  12. Replies
    20
    Views
    1,431

    The leaks I was talking about with the hose would...

    The leaks I was talking about with the hose would not be due to a loose clamp... it would be due to the plastic hose degrading over time and cracking, leading to small pinholes that leak gas back...
  13. Replies
    20
    Views
    1,431

    There are a lot of things here... 1.) I wasn't...

    There are a lot of things here...

    1.) I wasn't aware Termignoni made an exhaust for the XB. Did you get a corresponding map for the exhaust or did you just run as is?

    2.) When you got the pump...
  14. Replies
    12
    Views
    918

    When the plastic hose going from my fuel pump to...

    When the plastic hose going from my fuel pump to my fuel regulator sprung two leaks my pump became loud. It was trying to pressurize the line and was working overtime. As soon as I replaced the...
  15. Hey Dean, do you have a dyno chart for your RTXB1...

    Hey Dean, do you have a dyno chart for your RTXB1 pipe? I get inquiries about the performance of the RTXB1 on my youtube channel and I wish I had something to direct them to like the ASB shootout. ...
  16. Replies
    18
    Views
    1,076

    Where are you in orange county? I am in Irvine...

    Where are you in orange county? I am in Irvine and have a Buelltooth.

    There are a lot of possibilities of what is going on with your bike. If it can be diagnosed, most of those problems are easy...
  17. Replies
    64
    Views
    4,527

    From happier days at MotoEnthusiasts 10760

    From happier days at MotoEnthusiasts

    10760
  18. Question, did this start occurring after doing a...

    Question, did this start occurring after doing a clutch adjustment at the inspection cover? Wondering if your diaphragm spring popped off the lock plate for your clutch adjuster.
  19. Replies
    6
    Views
    544

    Have you checked the pistons on your calipers to...

    Have you checked the pistons on your calipers to see if they are dirty and are sticking? Also, how is the brake fluid level?
  20. Replies
    10
    Views
    960

    Here, you can start here: ...

    Here, you can start here:


    https://www.youtube.com/watch?v=bjFy_X-00tQ&t=413s
  21. XB Clutch adjustment with Muller Power Clutch settings

    Since there were some discussions on the facebook page about the muller power clutch, I decided to make a video for adjusting the clutch on the XB with settings for the Muller:

    ...
  22. Replies
    0
    Views
    203

    INNOVV K2 motorcycle DVR

    I just completed a review of the INNOVV K2 motorcycle DVR. If you are looking for a DVR, take a look at the review and see if it fits the bill for you. Also, watch the review to find out how you...
  23. question, have you ever tried to put some grease...

    question, have you ever tried to put some grease on the pivot pin of your lever? I get slight sticking where it would catch slightly from time to time similar to what you are describing and cleaning...
  24. Replies
    15
    Views
    1,344

    where does the noise originate? Side? Forward or...

    where does the noise originate? Side? Forward or rear? Have you adjusted the primary chain recently?
  25. ever give a small telescopic mirror a try to see...

    ever give a small telescopic mirror a try to see around the bend?
Results 1 to 25 of 418
Page 1 of 17 1 2 3 4