I was out riding last week and after trying to shift up into 2nd the bike went into neutral so I went back down to 1st then tried 2nd again and instead it went back into neutral and now isn't moving...
Type: Posts; User: Rocksteady
I was out riding last week and after trying to shift up into 2nd the bike went into neutral so I went back down to 1st then tried 2nd again and instead it went back into neutral and now isn't moving...
Can anyone confirm if the transmission parts are interchangeable from xb9's into xb12's
selling any parts out of a 2007 buell xb9sx Lightning motor. Located in Phoenix. Had the typical crank issue but other parts are in great shape i.e. Heads, starter, oil pump, cams, jugs and pistons,...
I'm at the point where I need to take the oil lines off of the swingarm of my '07 XB9SX, can anyone tell me how to take them off the manual calls for using a special tool that I do not have. Plus...
I am finally getting around to replacing my 2007 xb9sx's motor and cleaning out the swing arm of metal shavings and plan to use the info I've found on the site does anyone know if the steps from this...
Any opinions as to whats the best vs affordable option either replace the engine or fix this one?
Finally getting around to taking a look inside my oil and found a ton of shavings.http://www.buellxb.com/buell_images/19156_20150422171221_L.jpg
Is there any chance the knocking could be from something other then the crank, like a timing issue?
I'm weighting my options as far as what to do with the bike, any opinions on how much i could get selling the bike as is? I also have a question why wasn't there ever a recall from this problem?
I'm looking for part numbers for the rocker and head gaskets, is it correct that the sportster front cylinder gaskets will fit?
My bike is making a knocking sound and I was hoping someone can point me in the direction as to what it is, I was thinking maybe the timing is off or the plugs are bad. Anyone have any ideas? Thanks....
Does anyone know how to do it yourself set/adjust the static timing on a 2007 xb9sx or a thread that details how to do it, or is it better/easier to have a dealer do that work? Thanks.
Thanks for the advice lunaticfringe
Ya, it's the kickstand for sure. I appreciate it but i have a replacement coming that should be here in a day or so.
Has anyone ever had their kickstand bend on them? I don't know what happened to mine but I parked it and left it in neutral and maybe three or four hours later went to leave and noticed the bike...
I just installed a different wiring harness in my '07 xb9sx and now after turning on the ignition and setting the bike to run the fuel pump kicks on and then off like normal but when I barley turn...
While replacing my wiring harness I've been stopped because I found the two wires the dealer "repaired," it turned out to be voltage regulator wires, and what he did was remove the plastic housings...
Got it to download, Issue was with my slow internet timing out the download.
Phoenix,Az
When I try and open the pdf it says the file is damaged and can not be repaired.
Bump
I can mechanically handle...
I can mechanically handle installing the wiring harness, the main issues is time since I'm a college student.
Bump
Does anyone have a '07 service manual they can send me a pdf copy of, I cant get the Buellmods ones to work. Thanks.
Forgot to add the first dealership refused to tare down the bike and look for any other issues and didn't do any internal engine diagnostics.
My 2007 xb9sx's story so far is, it was hit on its right side landing on its left while sitting in a parking lot in April, resulting in it needing a new swing arm and left side primary cove among...