I would use a NEW gasket and torque to specs...gasket is not that expensive and will give you the chance to change the fluid too.
https://www.ebay.com/itm/133371645904
Type: Posts; User: dawiz45
I would use a NEW gasket and torque to specs...gasket is not that expensive and will give you the chance to change the fluid too.
https://www.ebay.com/itm/133371645904
Ok...here’s what I found so far...
1) The only engine code is a "21"...which makes sense cause I have disconnected the exhaust valve when I installed the Hawk muffler mod.(guess I need to pick up...
Thanks for the tips...working a stretch of 21 'nites' right now...prob be the 28th before I have a chance to trouble shoot any further...I will up date as I do.
You betcha!:eagerness:
...any clues on where/what location to check the ground at?
It wasn't a waste...while the info 'lunatic' provided was helpful...and I would have used it to reseal/rebuild my 06 forks...I was still unable to find part #s for the 07 springs...I did talk to a...
Try St Paul HD...ask for Lance @ 651-738-2168
Well...I noticed the lack of my cooling fan running at shut down a week or so ago...(here on the Gulf Coast of Texas it is already getting into the low 90’s at midday)…and at that very same time, I...
Welp…I took the easy (but expensive) way out…found a pair of NOS forks for a 2007 Uly (updated springs) on ebay at St Paul HD and called Lance the parts guy/Buell rider who was very helpful and free...
After 21000 miles the fork seals on my 2006 Uly have finally given up...I figure while I have them apart I might as well go ahead and up grade to the 2007 springs...I hear that will solve the...
They make a longer stem version of the same mirror...I have them on my Softail.
Yep...I stalled 1" and it was all I could get out of the cables, lines & wires!
Still no 180...
Depends on your point of reference...we used to see them on the CMC bikes coming out of CA back in the early 1990's...they were the latest west coast 'go fast' ecm/ignition then...but I don't know if...
...yep...super glued the tab back on...held my mouth just right...wiggled and prayer and got it back on...dreading the next blinker bulb failure!?!?!?!?!?
It is a Thunder Heart ignition...it is an HD part....you can look on Dennis Kirk. & J&P Cycles
Man…what is the trick to disassembly & assembly of these darn blinkers?!?!??!?...I have broken the little tab off on 2 lenses trying to put it back together after bulb replacement on my 2000 X-1..I...
Cool...Thanks for all the help.
I just broke all the hardware loose on the side stand then put it up on the bike lift as nativeXb12Rbuell suggested and strapped it down...a little unsteady, just...
Thanks for the welcome!
And...I know how to do it myself...been riding HDs since 78...so I am experienced at wrenching...and getiing no respect...(HDs were not always "Cool")
I have 2 HD/Buell...
New to Buells. Just got an 05 City-X and need to change my rear tire. Now I discover that all the technics that I have used in my 36 years of motorcyle riding won't work on a Buell. If I had a lift...