Search:

Thanks Fishxb12, Alien, and Banshee, for the offers, I will finally b able to get this god-awful sounding Jardine off it.
Anyone know if a Vance & Heins off a S-1 could be somewhat easily fit to...

Looking for an IEV cable as the PO cut the end off of it when putting a Jardine can on?
Thanks for looking, and for the great forum.


Prototech,

(Re-initiating Lurk Mode)

I think it's a great idea if you can source a large enough injector. With the cooling effect of the alkie, detonation will be somewhat reduced, (aka more boost :D) while the gas content will make...

Thanks For All The Great Information Guys, I will see if they have enough of the parts to make it viable.
Prototech

So If i strip my o7 S and rebuild it on the XT Frame the shock will be the biggest issue then the brake lines? I will be using the short swingarm/belt.

so the tail could be delt with, but the shock and oillines, controls would all have to come from a long frame. I don't think they have all of that available, so i guess i'll just keep looking for a...

I have a complete 07 with a salvage paper and was looking to do a frame swap, if im understanding you right i would need longer oil lines (swing-arm mounted further back), the tail mount brackets are...

How big of a headache would there be in converting??
Still a bit green on parts interchange on these critters.

Prot

Is an 08 XT frame backwards compatible with a 07 XBS? I found one to replace mine with but it is an 08. I am just looking for a bit of peace of mind before i drop the coin.

Prototech

FWIW, my brothers blast suffered the same symptoms. We after much chasing found the fuel (ethanol mix) separated in the tank, at first we thought it was water from a leaking cap/gasket, but after...

Thanks nikfleisch, it's funny how deep tissue bruises in my shoulder and chest hurt SOOOO much more than a lopped finger..'' I would have happily cut off another finger if it would have...

no shooting gallery here, IIRC there were few major differences in the engines, none that would cause substantial problems running a swapped, remapped xb9 ECU. (I have no exhaust servo.)

Prototech

Hmm maybe i overestimated him.... Is there any way to determine the year of the motor?

''

Kudos to them for shure, got a bunch of parts for my bolt from them.

Proto

I was able to get my other brother (the one that can read) ':D' to send me the numbers from the frame and engine.
Engine: AX145000249
Frame: 44ZAX12J633405502

DamnItMan,,,

how do i kill my first of the double post?

I had forgotten about the color differences, it is for sure a hybrid, the swing-arm is polished but black/grey around the shock mount and the rear wheel is black also, but the frame and front wheel...

I had forgotten about the color differences, it is for sure a hybrid, the swing-arm is polished but black/grey around the shock mount and the rear wheel is black also, but the frame and front wheel...

Thanks for all the info ya'all. I am gonna pull the prom and compare it to my 07 XB12 to see how much difference there is. If it can be determined what year the motor is I will be on the hunt for a...

Hi all, been lurking off and on for a good while and finally have a problem the search engine hasn't solved for me.

I recently bought a '03 XB9 From an insurance auction, It had been face-planted...

This one's, All Gone.