Reply With QuoteEbeo: What model bike do you have?
Started my firebolt bolt and pushed it out of the garage this morning and to maximize warm up I went back in the garage to put my helmet on. Well I didn’t have the kickstand down all the way and my brand new bike fell over broke the left mirror and turn signal.
I have a few options
1)I can do a mod on the mirror / signal
2)Repair the damaged mirror/signal with original parts
3)Try to find some used parts
I’m going to post a WTB for used stuff on here but what are my options for on turn signals and mirror modifications?
Ebeo: What model bike do you have?
Um... the post says started my firebolt so I'm going to assume a xb12 or 9 r firebolt lol... You can find used parts at good prices at buellsterparts.com . there are several options as to what look you can go for smaller blinkers, leds, short or long stalked mirrors, I think you an even use the mirrors with blinkers integrated.
i have stock signals and mirrors off my 03xb9s you can have them for free..pay for shipping
oops..dont think they're the same part
I just assumed all firebolts used the same parts xb12rEbeo: What model bike do you have?
in looking at the pics, it looks like the signals are the same. i can ship you out a signal if you want.
When I got home from work I looked over the bike looks like I bent the shifter and clutch too I can survive with the mirror its only cracked and I might be able to get away with new bulb and cover for the turn signal.
Sorry guys, I missed the firebolt part in the beginning. You can bend the shifter back. Just be patient and easy with it. I had to do mine til I got a new one. I have lenses and bulbs as well as whole signals. I don't have a clutch lever though. Let me know if you still need them.
Take this advice to heart, it's cast aluminum and will snap clean off is stressed too eagerly.You can bend the shifter back. Just be patient and easy with it.
Posting Permissions
