NO power commander for the newer buells to my knowledge. EcmSpy is your best bet
im having truble keeping my bike running smooth i take it to harley and they keep ajusting it on a cumputer but in a cuple of days it runs hot and jurky is the a power comander that works on my bike
NO power commander for the newer buells to my knowledge. EcmSpy is your best bet
If they do make one don't waist your money. As warlock said use ecmspy it will do so much more than a power commander, and the best thing about it is it is free (except the cable which is about $40-50)
The EcmSpy web page says that the softwear is no longer available. The links to get the cable are also now bad. What gives?
Power Commander modulates your ECM data. But your stock ECM is fully programmable and has way more depth. You have and 2007 or earlier? ECM spy
Get one from Xoptiinside.com or Ebay.The links to get the cable are also now bad.
i got one from moto madness
If your bike is 08 or later try this: turn on the ignition, make sure the kill switch is on, then, open the throttle fully hold for one second and shut it. Do this 3 times. On the later bikes this re-sets the tps.
Also try fitting the breather mod as this does effect the running of the bike.
I once ran across a simple fuel controller made in Germany or England but can't remember the name or site. It allowed you to lean or rich the mixture without programing the ecm I think. Anyone know what product it was?