extremely nice piece of engineering here. best one i've seen....would you mind listing the parts/sizes you used?
Just done the breather mod but used 8 and 10mm
chrome copper tube for the outlets with a
ball o fix valave to let out the crap.
took about 3 hours bit fiddly to get into place
but works fine
extremely nice piece of engineering here. best one i've seen....would you mind listing the parts/sizes you used?
Thank you
as i am in the uk the parts miht be slightly
different but im sure the same can be found
vent is 9mm oil breather off of ebay
the copper tube is 8 and 10mm chrome plated used for gas fire instalation
the valve with the yellow lever is a water on off valae
the tube is soft and will bend easily but to get a
decent bend the tube benders in the picture get a good 90 degree bend
all joint are soldered
if you need any more pice or info ill put them on
thats amazing and im jealous lol nice work
NIcely done! That looks like a workplace sponsored project ;)
I really like it very pro style looking .
Dang that looks awesome. May have to pull mine out and do something like this
If you cant get hold of a tube bender a spring that just fits over the tube will do the same thing and when soldering use wire wool to clean all joints and flux to get the solder to flow into the joint
i could make em for you just the pipe work and you would just have to fit the valve and flter of your choice now i have made one you would just have to pay for package and post from uk about 10 dollars i expect
I know what I'll be doing next week when I'm off. :p