, start, things, jewelry, starting, great, garage, buell, stretching, shorted, ground, carrying, bucking, flashing, issues, diagnose, patience, cruise, weeks, working, cruising, googling, revealed, codes, intake, bueller, culprit, points, defaults, positive, values" />
ok ill check my grounds again. its wierd that a ground issue would cause this
This sounds kind of similiar to a problem I was having with mine. I tried doing a TPS reset and the bike took a **** afterwards... Turned out it was my idle screw.. The cable had kinked and I couldnt adjust it anymore... talked to EBR and they sent me a new one. installed it and did a TPS reset and it runs like a champ now... And also I was getting a code13 also... saying I was always running lean. I didnt have the other code... but just throwing that out there.
so after u got the new idle screw it fixed it? i know mine turs really hard. I cleaned my grounds up but that didnt fix it. the bike runs perfect when i first start it then i ride for about 5 min when it gets warm and it will start running rough around 3000 rpm. after about 10 seconds of this the cel will come on and then it starts running smooth with the occasional spudder. also the afv will creep up to 110 or 120 the longer i ride it the higher it gets
Posting Permissions
Reply With Quote