check out the video on this thread. Dave has been posting these for us all to use as a guide line.
how to videos
Hello all,
Just purchased an 03 buell xb9s. My clutch lever is extremely hard to pull. I have checked the forum and the manual and cant find out how to adjust this so its easier to pull. Any help would be appreciated. Thanks guys!
check out the video on this thread. Dave has been posting these for us all to use as a guide line.
how to videos
Go into the "Do It Yourself" section and there is a video on how to
You need this right here
It´s a big diference from stock.:D
lube the clutch cable after that ride it for a few months your hand will get stronger.:)
Clutch-lite Clutch Ramp & Install - Easy Install, big reduction in pull force, and around $50!
No adjustment is available to change force necessary to pull clutch lever.
Keep clutch lever & cable clean & lubricated. Give attention then to these two details:
1) Clutch lever pivot @ its perch gripping handlebar.
2) Clutch cable end @ clutch lever.
Ok..so what I am getting is that there is no adjustment for the force it takes to pull the clutch lever. I have had a few bikes and this clutch seems unusually tough to pull. Maybe I just need a aftermark one
Have you lubed the cable yet and checked for any places that it could be binding?
theres the muller clutch ramp,the clutch lite,i would try lubeing the cable or replacing the cable. the buell clutch is a little harder than most but i wouldnt say extremely hard.american sport bike has the lube and tool.