Results 1 to 8 of 8

Thread: Accidentally shifting into neutral while riding?

  1. #1
    I find that when I'm downshifting I sometimes accidentally shift the bike into neutral. It makes a grinding sound and I quickly shift it into first. Is this damaging the bike? And does anybody else find this bike is a little rough shifting down?

  2. #2
    Senior Member
    Join Date
    May 2010
    Posts
    305
    I wish I could find neutral that easy, but yeah...downshifting sounds rather painful on my bike sometimes.

  3. #3
    Senior Member
    Join Date
    Apr 2010
    Posts
    619
    The gear boxes are no doubt rough!
    They clank alot but its never good to hear grinding.

    I rarely down shift to first unless maybe slowing down for a speed bump in a parking lot.

    Take a look at your clutch cable where it connects to the lever at the handle bars and see if it is frayed at all or needs to be tightened.

  4. #4
    Senior Member
    Join Date
    Aug 2008
    Posts
    5,146
    Do your clutch adjustments, both the cable and the one in the primary - both are outlined in the downloadable Service manuals. Also, if you don't already, start using a Full Synthetic, Motorcycle-specific Oil - it will help a great deal and is best for your engine.

  5. #5
    Senior Member
    Join Date
    Jan 2010
    Posts
    212
    Somewhat the nature of the machine: large crankshaft flywheels, heavy primary & clutch assembly.
    That much mass accelerates and decelerates with authority, force. Gear changes don't snick, they smack :)
    Care and throttle control help. Pre-loading shifter moments before making changes makes my shifts smoother, too.
    +1, second-to-first is toughest change in the box.

  6. #6
    Senior Member
    Join Date
    Jan 2007
    Posts
    624
    Blipping the throttle - lol - and if the cluth adjust doesn't work, then it is time for the Shift Pawl adjustment, new Detent plate and clip, chamfer the stator wire protection plate, even out the drum pins, and inspect and clean up your primary, perhaps a new primary chain guide as well.
    EZ

  7. #7
    Senior Member
    Join Date
    May 2010
    Location
    GOODLETTSVILLE,TN
    Posts
    895
    The shifter forks are actually brass on these machines,S don`t force it.A good oil helps,and see if adjusting your shifter lever up or down just a little helps.Find a good comfortable position where you don`t have to force any thing with your foot.If I remember right they have reverse threads on the adjuster.I also wait till I slow down just a little more,before I shift into first,that way there isn`t as much of a load on it at that time.

  8. #8
    Senior Member
    Join Date
    Jan 2007
    Posts
    624
    Funny thing is though - those shifter forks are strong and made to take a lot of power, stock trannys have been known to last more than 1 drag racing season in the hot modified twins before a rebuild is needed - so we are not talking about a part that needs real special babying, just respect that it can bend given enough force enough times - lol
    EZ



Similar Threads

  1. shifting into neutral
    By bcbull4 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 3
    Last Post: 01-04-2015, 10:54 PM
  2. xB9 not shifting into neutral
    By focalepointe in forum Buell Firebolt XB12, XB9
    Replies: 9
    Last Post: 08-21-2013, 09:58 PM
  3. randomly goes into a neutral state when shifting .
    By Nativ3 Rag3 in forum Buell Blast
    Replies: 4
    Last Post: 07-04-2013, 11:57 AM
  4. Clunky shifting from neutral to first
    By Justaerin in forum Troubleshooting
    Replies: 15
    Last Post: 07-18-2012, 12:31 PM
  5. SHIFTING IN TO NEUTRAL
    By Rubiel561 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 3
    Last Post: 01-12-2012, 12:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •