Heres a new approach to angry eye headlights. Instead of lowering the flyscreen, how about raising the headlights!? haha, took some time this afternoon and figured it out. Brings the headlights up tighter which i think looks better to begin with. All you do is just drill holes in the headlight bracket higher (along with this you will also need to cut off a bit of the bottom of the bracket as well...
something like this.
when you get everything put back in.. should look like this!
not extremely angry.. but i like it!
Heres some icing on the cake... while i had the headlight out i took the whole assembly apart.
then created a little contraption.. check it out...
i put this where the.. (parking light?) used to be.
You can see it in one of the pictures above. Then i wired it in with the rest of my leds...
Looks awesome. Can you still aim the beam with the lights raised?
i have mine up as far as they can go (restricting movement a good bit).. however they are still adjustable to some degree. If you leave them down a little further than mine you should be able to adjust without much problem. I will have to take mine out and see if i can ajust the headlights correctly. Good thought.
nice one mate...
It looks slightly pissed not angry ,but looks good.
haha, yes.. thats why i call them affronted eyes.It looks slightly pissed not angry ,but looks good.
i wasnt going for the angry eyes look. i originall just wanted to lessen the gap between the headlight and that metal shroud above it. but turns out it looks a little pissed as well! haha.
the red looks slick! I like what they look like in the headlight housings too. eventually i'll get around to getting some blue LEDs for mine
Posting Permissions
Reply With Quote
