the year would help,is it missing,dieing,or just shutting off.
I'm at a track now right now and my engine keeps cutting out.
It's a stock bike with only the gauges removed. It's never been a problem before.
What it's doing: the starter doesn't always engage right away when I push the starter button. It's like I have the kill switch on. Generally it's only a second or so. It's never done that before.
I've checked all the grounds I know of. I've switch the relays around. Checked all the connections.
Any help would be great.
Thanks
the year would help,is it missing,dieing,or just shutting off.
Mabiee it has something to do with the cluster being removed.....
It's an 09.
The engine sputters a little bit at idle. The first session it just died. After I stopped it started right back up.
This last session it ran fine. And it started right up. Hopefully it was just a lose connection.
try a tps reset it only takes a few seconds.
i would check your bank angle sensor, if need be by-pass it.
It's been running great. I think it was a relay. I switched the ecu relay with the acc relay. I'll see when the lights are back on if that was it.
I did check the angle sensor and it was fine.
Thanks for the help.