Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: buell fuel pump puller

  1. #1
    Junior Member
    Join Date
    Jul 2010
    Posts
    3
    part # B-45657 from what i have found out it only costs $60.00 through Harley from kent moore tools ... the thing is they say it will take 2-3 weeks b4 i will have it . wtf'f with that ??

  2. #2
    Senior Member
    Join Date
    Apr 2010
    Posts
    808
    you dont need it i pulled mine without it. just work it out with a screwdriver or something

  3. #3
    Senior Member
    Join Date
    Jan 2010
    Location
    Melbourne, Australia
    Posts
    274
    +1 on using a screwdriver. If you put a short bolt on the threaded puller hole and use something as a small fulcrom point on the frame (I used a 1/4" socket sitting on a rag to avoid marking the frame) a flat-bladed screwdriver will work just fine to lever on the bolt-head.
    There are probably many ways to do it but that is one that doesn't risk marking the pump or the frame.

  4. #4
    Senior Member
    Join Date
    Aug 2009
    Posts
    1,344
    made one from scrap metal; its curved instead of squared like the kent one. drilled a hole in the middle and came out in 30 sec. :D

  5. #5
    Junior Member
    Join Date
    Dec 2012
    Posts
    14
    What size bolt fits in the puller hole?

  6. #6
    Senior Member
    Join Date
    Jun 2012
    Posts
    1,334
    I have one I made and I didn't even use it

  7. #7
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    1,998
    I made one to and have used it a couple of times

  8. #8
    Senior Member thrstrmech's Avatar
    Join Date
    Jul 2011
    Location
    Arizona
    Posts
    5,354
    try jim's usa...they may not have the tool you're looking for, but they have lots of others tools for Buell motorcycles, catalogs are pdf format, tools start on tab 20

  9. #9
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,416
    I used a screwdriver, it wasn't that hard to get out.

  10. #10
    Junior Member
    Join Date
    Dec 2012
    Posts
    14
    What size is the bolt that fits in the fuel pump threads????



Page 1 of 3 123 LastLast

Similar Threads

  1. fuel pump puller bolt size?
    By wolfo68 in forum Buell Parts Guy Questions and Answers
    Replies: 5
    Last Post: 12-15-2018, 07:57 PM
  2. Buell xb fuel pump / house of pain
    By Bello in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 6
    Last Post: 10-18-2013, 01:55 AM
  3. where to get fuel pump strainer and fuel filter
    By Draxsonimy in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 3
    Last Post: 03-03-2012, 03:52 PM
  4. Buell xb9s Fuel Pump ???
    By hsnuwan in forum Buell aftermarket parts
    Replies: 2
    Last Post: 10-30-2009, 02:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •