Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: UP-GRADE

  1. #1
    Senior Member
    Join Date
    Nov 2010
    Posts
    447
    Anybody ever talk to EBR about 1190 up-grade..how much,i'm not talking about the bikes he sells..:p

  2. #2
    Senior Member
    Join Date
    May 2009
    Posts
    177
    Do you mean an upgrade from 1125 to 1190..?

  3. #3
    Senior Member
    Join Date
    Nov 2010
    Posts
    447
    yes

  4. #4
    Senior Member
    Join Date
    May 2008
    Posts
    6,470
    I hope he's not talking about a XB or Blast upgrade

  5. #5
    Senior Member
    Join Date
    May 2009
    Posts
    177
    I read an article (can't remember which one) where Erik said that that's how they were being made...they still get the 1125 engine from Rotax, then they tear it down and rebuild to the 1190 specs.
    It involved titanium connecting rods and I think valves as well (for a higher rev limit). And of course cylinders and pistons. Other than that I can't remember what else was done.

    To me that sounds expensive...

  6. #6
    Senior Member
    Join Date
    Feb 2010
    Location
    Pittsburgh
    Posts
    3,274
    At least there shouldn't be any shortage of 1125 pistons, cylinders and connecting rods any time soon

  7. #7
    Junior Member
    Join Date
    Jan 2011
    Posts
    3
    The 1190 is $44,000 I bet the upgrade cost more then the stock 1125 at full retail

  8. #8
    Senior Member d_adams's Avatar
    Join Date
    Apr 2010
    Location
    Just outside of St. Louis
    Posts
    3,542
    I heard it from a fairly reliable source that the 1190 "kit" consisting of pistons, wristpins and cylinders will come in at a somewhat reasonable price. I'm not under an NDA or anything, but I will not steal their thunder on the pricing. Bolt on 20+ hp is just a guesstimate for power. I'm sure that extra fuel would be required, so a race ecm would be a must have item also.

    It will be one of the upgrades I'll end up doing to my bike. The 1190 kit and one of my custom pipes, I can see hitting 160+ hp at the wheel, easy. I'm almost to 140 as it is with just the pipe alone, so it's not a huge jump.

  9. #9
    Senior Member
    Join Date
    Mar 2010
    Posts
    7,805
    1190 wouldnt be worth 44,000 even if he had a 2 for one deal.your better off getting a bmw,ktm,600rr and drop 5-6 grand into a buell.

  10. #10
    Senior Member d_adams's Avatar
    Join Date
    Apr 2010
    Location
    Just outside of St. Louis
    Posts
    3,542
    2011 1198 R Corse Price $39,995.00

    Performance
    Horsepower (bhp): 180 bhp
    Torque (Ft Lbs): 99 lbs


    Sure, it's a tad cheaper, but I'd take the Buell if I had the $$ to buy one. $45k for a pure race bike, it's not out of line when you compare what they are. Besides, the 1190 puts 185+ hp to the ground, not at the crank.

    On a side note, I'll probably never race mine (well, track day, etc.) again, so the 1190 wouldn't really be a wise purchase for me. I'd love to have one nonetheless.



Page 1 of 2 12 LastLast

Similar Threads

  1. Front fork Oli grade/Clutch replacement
    By camrojas in forum Buell Firebolt XB12, XB9
    Replies: 6
    Last Post: 06-17-2014, 05:34 PM
  2. What grade of gas should I put in my bike?
    By unclepickle1 in forum Stock
    Replies: 48
    Last Post: 07-13-2013, 02:29 PM
  3. should i up grade
    By venom in forum Buell 1125CR
    Replies: 8
    Last Post: 06-17-2011, 08:51 AM
  4. Performance up grade
    By Rbatin in forum Race Kits
    Replies: 14
    Last Post: 07-15-2009, 05:01 PM
  5. xb9 oil grade
    By desandrews in forum General Motorcycle Chat
    Replies: 4
    Last Post: 06-08-2009, 03:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •