Won't fit, hd's use a 5 bolt pattern and the xb's use six. You could get a different front pulley as long as you make/buy an adjustable idler.
Matt
Has anyone used the rear drivebelt pulley off of a 2003 Sportster (61 tooth) to replace a 09 XB9SX to creat lower RPM at higher speeds. If so please advise of any problems.
Thanks!
Won't fit, hd's use a 5 bolt pattern and the xb's use six. You could get a different front pulley as long as you make/buy an adjustable idler.
Matt
Like mentioned above just switching pulleys isn't an option since they are a direct fit and need to have a specific count from AND rear to fit the stock belt.
They sell Aftermarket pulleys to gain what you want but you are looking at about $600 for the two pulleys
i have (2) 70T 1125R pulleys i'd be willing to part with.
make an offer