XB9 shifting problems

[Sirius815]

^^ really?

[wiznut]

Try a TPS reset

Fixes everything! :D

[dave_xb12r]

And a breather re-route!

[bfletcher]

A bike in neutral at a stop light adds very critical time to perform an evasive maneuver.

Tear into it. I would suggest video taping yourself while tearing it down. That way you will have a reference when going back together with it.

[twoguns]

i would agree with 07bolts detail. had a mate with exactly that. the lever seemed ok, but the shaft in was bent and was outa whack. didnt notive it at first but as time went on the bike ran for a while after, but hten got worse and worse till no more gear changes.

and baja... you are really starting to resemble a fuktard. select a different gear!

[bajabomber87]

and baja... you are really starting to resemble a fuktard. select a different gear!

I would select reverse.

[twoguns]

haha... good idea.

[Jobe Zeebuh]

so look at ur clutch lever, cable too.

Already replaced with new ones.

Are you using synthetic oil in the primary?

Yes

Tearing into it scary but here I go.

[Xb12sLt]

Take your time and take a lot of pictures like bfletcher said, that way you have the pics to look back on just in case. Good luck and hope its something easy.

[bajabomber87]

Theres nothing scary or difficult about looking in the primary, your shift shaft is simple and straight forward. Make sure to put a punisher sticker on the inside of the primary while its off.