Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Frame puck

  1. #1
    Senior Member
    Join Date
    Dec 2010
    Posts
    538
    Has anyone covered a dent with a frame puck? Did you fill in the dent with bondo or aluminum puddy before putting on the puck or just cover the dent?

  2. #2
    Senior Member
    Join Date
    Dec 2010
    Posts
    1,528
    I just covered a dent. Sorry no pics.

  3. #3
    Senior Member
    Join Date
    Dec 2010
    Posts
    538
    It's to cold to put it on now but i sized it up and it looked like it had about 2" on the outside making contact. The part that has me worried is that when it was on i could see a little empty space from the back where the two angles meet.

  4. #4
    Senior Member
    Join Date
    Dec 2010
    Posts
    1,528
    Heat the non adhesive side with a blow dryer for 2 mins or so. Then press the puck on very firmly and hold for as long as you can. Continue to press the puck firmly into the gap you speak of. Remember that because you heated the puc the drying time of the adheasive double's. Good luck :)

  5. #5
    Senior Member
    Join Date
    Dec 2010
    Posts
    538
    Thanks Jobe

  6. #6
    Senior Member
    Join Date
    Dec 2010
    Posts
    1,528
    4 sho :D

  7. #7
    Junior Member
    Join Date
    Oct 2022
    Posts
    11
    I realize this is a very old thread... 2004 XB9S that I've put a few thousand miles on. I can't find pucks that I am willing to pay that much money for. Thinking of heating up some plexiglass and pressing it against the left and right side, then cutting it after it takes the shape and has cooled, painting it black after that. Double sided adhesive to stick to bike. My brother-in-law does carbon fiber work and i was thinking of maybe having him cover them for me. Flat black is easy and cheap though.... I have swingarm sliders and working on front ones. This is my 5th motorcycle. 3rd was a MV Agusta Brutale 910S, so this is not as fast as that but still fun. Recently replaced my own fork oil, put new front and rear tire on, and changed all fluids.

  8. #8
    Junior Member
    Join Date
    Oct 2022
    Posts
    11
    ***Yes. I'm dyslexic. The BX was not intentional...

  9. #9
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    11,038
    Sounds much easier and cheaper to just buy them? You can get carbon fiber ones already done.

  10. #10
    Junior Member
    Join Date
    Oct 2022
    Posts
    11
    Thanks for the input sir. I will look around and see what's out there.

    **I read a lot of posts on here before saying anything and you had shared quite a few of them. I'm learning.



Page 1 of 2 12 LastLast

Similar Threads

  1. Frame puck - RH - new
    By mili9152 in forum Buell Parts for Sale
    Replies: 1
    Last Post: 11-18-2012, 12:52 PM
  2. Does anyone need a Ulysses or SS frame puck?
    By Atomicpunk in forum Buell Parts for Sale
    Replies: 5
    Last Post: 02-20-2011, 03:42 PM
  3. Anybody know what frame puck...
    By beefy99 in forum Buell aftermarket parts
    Replies: 3
    Last Post: 10-22-2010, 05:51 AM
  4. FS: SS right frame puck
    By Rebel_CafeRacer in forum Buell Parts for Sale
    Replies: 3
    Last Post: 08-31-2010, 07:05 AM
  5. Frame Puck Help
    By Somthngfrce in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 2
    Last Post: 11-08-2007, 12:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •