Here you go. Put mine together from this list they had in the parts catalog pdf I downloaded. (Page 51). I bout one of those husky bucket tool wraps. Cut it at one end. and just use it as a tool wrap. Granted its a lot bigger than the standard toolkit... but it fits in my backpack and allows for spare things like hose clamps, thread coils, mini flashlight. etc. Hope this helps. After the dash is the model of Buell that tool pertains to.
7/16" x 1/2" Double Open End Wrench Clutch Cable Adjustment - All
9/16" Combination Wrench Clutch Cable Adjustment - All
5/8" x 3/4" Double Open End Wrench Fluids, Mirrors, Spark Plug Socket, Short - All
13/16" x 7/8" Double Open Ended Wrench Primary Chain Adjustment - XB’s
10mm Combination Wrench Brake Lever Adjustment, Battery Terminals - All
12mm Combination Wrench Brake Lever Adjustment - All
13mm Combination Wrench Mirrors - Blast®
14mm Combination Wrench Rear Brake Pads - XB’s
19mm x 21mm Double Open End Wrench Mirrors - XB’s
1/8" Hex Key* Idle Adjustment - All
5/32" Hex Key* Shifter Adjustment - XB’s
3/16" Hex Key* Idle Adjustment, Shifter Adjustment - All
7/32" Hex Key* Handlebar Adjustment - All
1/4" Hex Key with Short Foot* Primary Chain/Handlebar Adjustment - All
5/16" Hex Key* Handlebar Adjustment - All
3/8" Hex Key* Handlebar Adjustment - All
4mm Hex Key* Handlebar Adjustment - All
5mm Hex Key* Handlebar Adjustment, Front Brake Pads - All
5" Round Nose Locking Pliers General - All
Multi-Bit Screwdriver** General - All
Spark Plug Gap Tool (Coin Style) Gap Spark Plugs - All
5/8" Spark Plug Socket, Short Spark Plug Removal - All models except XB rear cylinder
5/8" Spark Plug Socket w/Universal Joint Spark Plug Removal - XB’s
6" Ratchet Drive Extension Spark Plug Removal - XB’s
3/8" Ratchet Drive Spark Plug Removal - XB’s
Black Cable Tie, 8" long (quantity 6) General - All
Black Nylon Pouch Tool Storage - All
* Hex Keys have a ball on longer foot.
**Included screwdriver bits are:
• Philips #2 and #3 • Turn Signals, Tail Lights, Brake Lights - All
• Slotted 1/4" and 3/16" • Clutch Adjustment - All
• Torx #25, #27, #30 and #40 • Interactive Muffler Cable, Oil Filter - All
To allow Buell Tool Kit P/N 94685-03Y to fit under the seat of Buell Blast® models the following
non-essential Blast tools should be removed from the black nylon pouch: 13/16" x 7/8" Double
Open Ended Wrench, 14mm Combination Wrench, 19mm x 21mm Double Open Ended
Wrench, Spark Plug Socket with Universal Joint, 6" Extension, 3/8" Ratchet Drive, 5/32" Hex Key