Reply With QuotePics first so we get a better idea.
just performed the breather re-route ( thanks to all the guys that did write ups and posts on the DIY, it would not have gotten done without them.) i think i have it right, i will post some pics as soon as i can get them loaded, my only concern is the way the hose is routed seems a little close to the front spark plug. should this be a concern?
Pics first so we get a better idea.
here ya go.
I was worried about the heat so I took mine back towards the tail behind the rearset - as long as you don't think it'll melt the hose.
I am changing my plugs and wires next weekend,so we shall see then.
If you switch the tubes coming off the motor it fits better for the way you have it routed.
But yours looks fine, that was the way I did mine I have had mine routed the same as yours down by the oil cooler and no problems with heat for over a year.
excellent point on the switching the hoses oh9bolt, i will do that tomorrow. thanks
Looks like you need a new front tire bro. Be careful in the wet.
haha, ya i know. im checking out places to order some michelin pilot power 2ct's.
Posting Permissions
