Page 12 of 13 FirstFirst ... 210111213 LastLast
Results 111 to 120 of 123

Thread: NO money LED flasher mod

  1. #111
    Another bolt now blinking LEDs after this mod! :)
    I desoldered (is that even a word?) and then used a spade bit by hand. Pushing and twisting from under and the connection came free. I removed it completely.

    Cyclic legend!
    Great photos snrusnak!
    Thanks for sharing all.

  2. #112
    Member
    Join Date
    Jun 2014
    Location
    Clovis, CA
    Posts
    87
    Mine for some reason looks like the 2010 kinda and I have an 07 Firebolt. But just compared the original pic to mine and I found what wire to yank... WORKS GREAT!!!!!! Thank you!!!!!!!!

  3. #113
    Senior Member
    Join Date
    Aug 2009
    Posts
    211
    Definitely works well. Great mod, simple and money saving. The blinkers still blink a bit faster than before. However its not as fast as bulb blown speed... if that makes sense.

  4. #114
    Junior Member
    Join Date
    Jul 2015
    Posts
    8
    Excellent tip friend. I will definitely try this, Led flashers are so much better. I was just looking at the flasher unit today, it's in the nose cone behind the lights on XB9Rs.

  5. #115
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,416
    It's easier just to do this mod, and it's free.... why fight what's natural???

    It works, I have it done on my bike.

  6. #116
    Ep36 it must say 3-6 led lamps on it.

    ^That info has been posted hundreds of times.

  7. #117
    IMG_0557.jpg I can't believe how easy that was! IMG_0556.jpg And it works! Thanks Cyclic

    Quote Originally Posted by cyclic View Post
    I've done this mod on several bikes and they have all worked great. Basically you open up the stock flasher and double check it has a timing chip. Orient yourself with the pic and your flasher, using the notch on the chip as a point of reference. Removing the indicated connection either above or below the circuit board will enable it to function as a LED flasher. Then just seal it back up with a glue or silicone and let dry. DONE.

    Last edited by JeremyConnors; 09-09-2016 at 06:57 AM. Reason: space

  8. #118
    Senior Member lancruza's Avatar
    Join Date
    Dec 2009
    Location
    King, NC
    Posts
    523
    Did this on an 09 CityX today. Works great. Thanks for the info on the mod.

  9. #119
    Junior Member
    Join Date
    Jan 2017
    Posts
    2
    Quote Originally Posted by Loki View Post
    Silly question. But where is my flasher on my xbr? Is it under the left side box? Cause I know the tops are not it. on either side.
    it should be directly underneath driver/passenger seat. it's a black cover.

  10. #120
    Member JonDredd's Avatar
    Join Date
    Jun 2016
    Location
    Maryland
    Posts
    47
    Thank You!



Page 12 of 13 FirstFirst ... 210111213 LastLast

Similar Threads

  1. Wish I had the money!
    By MotoX6 in forum General Motorcycle Chat
    Replies: 9
    Last Post: 07-22-2013, 02:07 PM
  2. Money to spend
    By xtreme in forum Buell Firebolt XB12, XB9
    Replies: 3
    Last Post: 06-27-2011, 02:40 PM
  3. need so make some more money....
    By njdevils1990 in forum General Motorcycle Chat
    Replies: 5
    Last Post: 02-02-2011, 07:38 PM
  4. My Money Pit
    By dragbikezx07 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 9
    Last Post: 05-08-2010, 08:13 PM
  5. Money?
    By burnteyes in forum Buell Parts Guy Questions and Answers
    Replies: 7
    Last Post: 06-12-2008, 01:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •