Kool, I have the original relay still and my LED relay is going bad so I will deff give this a try!
Cyclic,
Thanks for the mod info. Is the modification shown in the photo the lifted chip leg on pin 7? If someone reverts back to incandescent turn signals, will the modified flasher still work?
Kool, I have the original relay still and my LED relay is going bad so I will deff give this a try!
Yep, still works great with regular bulbs. It changes the timer circuit to purely time based with no reguards to resistance. And yes the mods is the lifted leg on the chip. The factory chip on the Buell should be soldered in, either cut on the top side or carefully cut the trace on the bottom of the circuit to get the same effect.
One note, the fast flashing is to indicate a bad bulb. This will no longer show when you have a bad bulb, it will flash at normal speed no matter what. So make sure if your running turn signals, to check the bulbs ocassionally and make repairs as needed.
I don't know who's incharge of stickies, but this should be one of them.
nice
[Stickied] ;)
yeah thanks I was just looking for led flashers and thought I would check her first. good show
Awesome gotta try this one!