http://www.buellxb.com/Buells-for-Sa...nversion--cage
You'll have to go with a chain conversion kit if you want to change your gearing.
To keep I short and sweet I want a bigger sprocket for my 03 xb9r and haven't been able to find one and ideas
http://www.buellxb.com/Buells-for-Sa...nversion--cage
You'll have to go with a chain conversion kit if you want to change your gearing.
That just what I didn't want to hear lol thanks
to change the rear sprocket you'll need a different belt and the biggest is the cr's 76 tooth, if you're trying to get more torque look at buying the smaller front sprocket
If you upgraded to the +04 pulleys you could use the 1125 r or cr sprocket. You would need to try a couple different belts. I did this on my blast. I have a cr rear and a tuber front with a 135 belt and an adjustable idler. I need to find a 133 belt because I want to put a 26 tooth front pulley on instead of the stock 27 tooth.
Matt
You think if I get the setup for a 12r that I could just swap everything over
yes, but you will have the same gearing as you have now. R or S, same thing. The ss. stt, x, xt are the same pulleys just a longer belt.
Matt
The rear speller on my buddys xb12r is bigger then mine but he has an 08. Wont a bigger speller lower the rpms at say 65 from just over 3400to around 3100
Your belt wont fit the newer sprockets. It's a different design.
Matt
Yeah I'd get a new belt too. bigger sprocket longer travel longer belt. So I can't take the newer xb12r setup and a new belt and put it on my 9r