There's a couple options that don't involve changing the swing arm.
I'll see if I can find the threads.
So I have been searching for a chain drive conversion for the 1125R and everything I read includes a swingarm and is priced around $1800..Im not looking for a swingarm as I will be building one for drag racing,just need front and rear sprockets..Any advice??
There's a couple options that don't involve changing the swing arm.
I'll see if I can find the threads.
Nobody knows of any?!?!?!?!? :p
you can just buuy the sprockets from Half Dead or EBR and the chain would obviously need to be rather long, so I guess that would be easy enough, I think EBR recommends the 502, but you should look at the expladed view of EBR's kit to see if there is anything else.
false alarm
The problem with not changing the arm is, how are you going to adjust the chain?
Here's an 8" over arm I did using the staock arm
Sprockets, EBR and Vortex to name a few. They are nothing special.
Old post I know.. but puzzled do you still have this setup...