The way i have my tsigs setup i cant bend my plate that way so I decided to bend it the other way :D Just a little but I have the lift blocks from diesel moto so that lets me get away with a little bit more of an upright plate.
This is how far up I get away with mine tilted :) Pulled over twice this season. Police never mentioned it.
The way i have my tsigs setup i cant bend my plate that way so I decided to bend it the other way :D Just a little but I have the lift blocks from diesel moto so that lets me get away with a little bit more of an upright plate.
I can hook you up if you're looking to buy vs. fab your own. You're a Pittsburgh guy too right? I'll hook you up if you're interested...Let me know!I need to get a set of sliders for my bike too.
Bike's coming together nicely 2004!
5-0dro
www.5-0dro.com
Thanks 50!Bike's coming together nicely 2004!
I finished up the tsig and plate bracket yesterday and got it mounted. Its not perfect but hey I Cut and Bent this piece out of Sheet Metal with no metal working shop tools whatsoever...Just a pair of metal shears a crappy benchvise and a hammer. :D
The new cheesegrater will be coming in the mail today. I will chop, paint, and mount by tomorrow and take some new pictures that are of a better quality.
Mounted up with LED plate light
Just an update. I finished the chop and paint this weekend. It turned out great and my custom undertail mounted up great. Here are some pictures.
The Start...Used a hacksaw and only had one side cut
Completely Chopped off...Still hacksaw phase
After about an hour/hour and a half with a cutting bit on my dremel and a bench grinder it was smooth enough for paint.
All finished and mounted up on the bike
Just some updated pictures before I tear it down for some updates and powdercoat.
Check the last date this post was updated.
I'd be amazed if that bike and those pegs are still around, let alone the individual that started the thread.