im not sure if its just noisy push rods or in the motor itself..anyone? or are they all noisy?
just got this xb9s only has 5k on it. and was in question of motor noise on lifter side of motor.I know Harleys are noisy, but this is kinda distinct..Is this normal?
im not sure if its just noisy push rods or in the motor itself..anyone? or are they all noisy?
Its all relative. Yes these motors are pretty noisy, however if its a loud ticking or knocking noise i would say its not normal.
Get us a video and we can get a better idea.
Harley built motors make a lot of "chatter", so that's normal.
If you're hearing heavy knocks then you have issues.
its not really a knock..more like sounds of noisy push rods..will take video tonight..thanks guys
look up videos on youtube and you should be able to get a reference for normal noise
If your not using synthetic, try it. I had conventional and I had a chirpy tap, I put in some mobile 1 synthetic v-twin and it cut the noise ALOT.
ya she has mobil 1 in her as well..this bike only has 5k on it, not sure if i should even worry about it..cause it runs very good
I have the same noise. Got my bike at about 5k now i am over 15k same noise still same beast. Just maintain your oil and keep synthetic in it and should be good. If noise gets louder or changes to a knock instead of the chirpy noise than worry. Otherwise Ride on.