Page 1 of 6 123 ... LastLast
Results 1 to 10 of 51

Thread: Breather Reroute

  1. #1
    Senior Member
    Join Date
    Mar 2011
    Posts
    1,814
    Ok Guys and Girls I have a 2010XB12R and have been reading about the breather reroute and catch can. Do I really need this mod? What exactly does it help with and finally I read that someone said a remap would need to be done. I am running a preprogramed EBR ECM, K&N and a Drummer SS. A little insight would be great. Thanks.

  2. #2
    Senior Member
    Join Date
    Mar 2011
    Posts
    1,945
    here ya go
    http://www.buellxb.com/Buell-XB-Foru...oute-Questions

    For re-map I am bout to work with a member named "theoctopus" here is a link to some info that we were just talking about
    http://www.buellxb.com/Buell-XB-Foru...-Flame-suit-on

  3. #3
    Senior Member
    Join Date
    Mar 2011
    Posts
    1,814
    Thanks Jakestolar, looks pretty cut and dry.

  4. #4
    Senior Member
    Join Date
    Mar 2011
    Posts
    1,945
    It is. Mine is a bit different tho. I have no filter or catch can. Just a small piece of tubing that drips on my exhaust

  5. #5
    I highly reccomend it I did it a few weeks ago and it runs way smoother, I didn't notice a power increase but its definetly worth. Oh and I didn't need a remap.

  6. #6
    Senior Member
    Join Date
    Mar 2010
    Posts
    2,748
    I did it on my 04 12r and ended up removing it after a while because I never got any of the drainage that most get....... My hose's were just as clean inside when I removed them as they were when I installed them.

  7. #7
    Senior Member
    Join Date
    Mar 2010
    Posts
    7,805
    waste of time and money imo

  8. #8
    Freak and anrkizm are right I had mine on for a year with no fluid ever in the hose, and it made no difference in how it performed anything, if it runs fine from the jump there is no need for it. I did it because I was trying to hit 160 with no luck.

  9. #9
    Senior Member
    Join Date
    Mar 2010
    Posts
    7,805
    I was trying to hit 160 with no luck
    lmao

  10. #10
    Senior Member
    Join Date
    Aug 2010
    Posts
    1,268
    I did it on my 04 12r and ended up removing it after a while because I never got any of the drainage that most get....... My hose's were just as clean inside when I removed them as they were when I installed them
    it has a lot to do with how much humidity is in the air, if its really dry, like here in texas, mine drains very little if any at all--------------i can attest that it DID GET RIDE OF THE hiccup @ around 80 or so while cruising, other than that, it just lets the crankcase breath and get cleaner air....thats pretty much it



Page 1 of 6 123 ... LastLast

Similar Threads

  1. HOW TO: BREATHER REROUTE + CATCH CAN
    By JustinMT in forum Do-It-Yourself Buell Mods
    Replies: 15
    Last Post: 03-19-2015, 12:33 AM
  2. Doing my breather reroute
    By IstartTheMachine in forum Buell Firebolt XB12, XB9
    Replies: 8
    Last Post: 04-20-2012, 10:40 AM
  3. Breather reroute.
    By wolfbynight in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 10
    Last Post: 05-27-2011, 02:08 PM
  4. Breather Reroute.. why not...?
    By Koen in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 1
    Last Post: 07-16-2009, 08:52 PM
  5. Breather reroute?
    By jabar2082 in forum Troubleshooting
    Replies: 4
    Last Post: 03-03-2009, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •