Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: xb12s oil and transmission change

  1. #1
    Junior Member
    Join Date
    Aug 2011
    Posts
    1
    Hey guys,

    I want to make sure that when i change the oil there is the primary and the swingarm and that the primary is the same as the transmission with regards to chaging the oil. Also, I went to get the supplies and the guy gave me motor oil as well as transmission oil. Will the transmission oil work for the transmission/primary if they are connected Or should I be using the same stuff for both oil changes (Meaning the motor oil for the swing arm and pimary instead of motor oil for swingarm and tranny fluid for the primary)

    Thanks guys

  2. #2
    use mobil 1 v twin for the primary and engine.

  3. #3
    Senior Member
    Join Date
    Mar 2010
    Posts
    7,805
    i use amsoil in both holes.

  4. #4
    Senior Member
    Join Date
    Mar 2010
    Posts
    674
    Yes, primary oil change is the same as transmission oil change. I have used mobile 1 v twin and now use Amsoil. 20w50. Both are rated for engine and primary. Hope that helps, had kinda the same question once.

  5. #5
    Senior Member
    Join Date
    Mar 2010
    Posts
    205
    Maybe this will help

    http://www.buellxb.com/Buell-XB-Foru...ngine-Oil-Vote

    Do not over torque the drain plug on the swing arm!!!!!!!!!!!

  6. #6
    Senior Member
    Join Date
    Mar 2010
    Posts
    7,805
    Do not over torque the drain plug on the swing arm!!!!!!!!!!!

  7. #7
    Senior Member
    Join Date
    Jan 2010
    Posts
    310
    Speaking of oil changes, how do you guys fill up the Swingarm with oil? I have used a turkey baster with another funnel on top of that but it doesn't work that good. Plus I have to loosen the passenger peg arm in order to get in it in there...

    Just wondering what other people use???

  8. #8
    Senior Member
    Join Date
    Oct 2010
    Location
    Indianapolis
    Posts
    1,007
    Long neck small funnel usually works for me. just watch the angle and make sure it is going in the swing arm, not on the tire :p

  9. #9
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    i live full synthetic 20-50 in the swingarm for the motor. any of the top brands are excellent. the left side of motor case has transfer hole so that the primary cover oil flows into the trans. the primary and trans fluid are one in the same. 1 quart is the capacity. personally, i think bel-ray gear saver, motul synthese, and silkolene red trans fluid are great for both the trans, primary chain, and clutch but engine 20-50 also works well in the primary.

  10. #10
    Senior Member
    Join Date
    Mar 2010
    Posts
    205
    I use a flex neck funnel something like this

    http://www.wholesalemarine.com/p/MOE...FUUBQAodjngx5A



Page 1 of 3 123 LastLast

Similar Threads

  1. Transmission Fluid Change
    By keithg78 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 15
    Last Post: 05-14-2013, 09:36 AM
  2. Oil Level Question after Oil Change ( '09 XB12S )
    By Rhino1 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 9
    Last Post: 06-22-2012, 02:24 PM
  3. Transmission noise after oil change
    By kristo60 in forum Buell Firebolt XB12, XB9
    Replies: 22
    Last Post: 11-19-2011, 11:24 PM
  4. XB12Scg 2nd Transmission Oil Change and Found Something Strange
    By cdj0902 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 13
    Last Post: 06-19-2011, 09:50 PM
  5. '09 xb12s, how do I change tranny fluid?
    By johnye75 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 7
    Last Post: 06-10-2010, 09:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •