Reply With QuoteI don't have a Uly but as far as I know all the bike ends of the cables are the same. You've got the right spy cable. Post up some pictures of the bike side.
I just received ecm cable I bought off ebay. , the service cable end I found on my 2009 Ulysses is under the air scoop on the left side of the bike. The ends are nothing alike. The cable I bought has 4 pins, 2 above the other 2, square shape. The cable end on the motorcycle have 3 pins, all inline. I'm also wondering if I have one of the ecm's that can not be remapped, the # on the ECM is Y0152.1AM 08205
all help appresiated
I don't have a Uly but as far as I know all the bike ends of the cables are the same. You've got the right spy cable. Post up some pictures of the bike side.
The diagnostic port on the uly is under the seat
bolt i was just gettin ready to post about the same pic!
Thanx you guys, I'll go take a look
What are you trying to do?
What am I trying to do? Good question now that I have cable and the cd with ECMspy i would like to have a look see on learning on how this mapping works I have quite a bit of computer experience my 09buell uly has a Jardine muffler, K,N air filter. The bike runs very rough when cold, surges at idle. Anyway I know enough not to try and change anything before I get some help from Tunavercity
You have to use tunerpro on the 09+ buells dont use ecmspy and brick your ecm. PM theoctopus he can help you out with his services.
brick ur ecm??? how so, new ecms not very compatible with ecmspy? ne idea why? dont have an 09+ just curious
08's and up can't be read by the "free" version of ECM spy, won't brick it, but, you won't be able to tune anything either
Posting Permissions